Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-22-2015, 02:43 PM   #5
Yeah, I've done that.
 
leftfield6's Avatar
 
Join Date: Aug 2014
Location: Atlanta GA
Posts: 91
Garage
All control arms, droplinks, track bars, and tie rods are being replaced. Are you guys saying THOSE parts are M030 specific? If so, then I'm going to come up short of being full M030. I knew the sway bar bushings would be M030 specific, since the bars are different sizes, so those are going to be M030 correct parts.

EJ-Fresno, I'm doing the work myself. I have the luxury of the Boxster being a third vehicle (technically, fourth if I count the motorcycle), so it's no big deal that it has been up on jack stands for a few weeks now. I only get to do an hour or so at a time on it, a couple of times a week, so it's taking me forever. I have completely finished the driver's rear, now working on the passenger rear. I've learned all the gotchas now, so the other corners will go a lot faster.

I'll be on the lookout for a rear bar.
__________________
1999 Boxster, Tiptronic, Hard Top, Arctic Silver with Boxster Red Interior
leftfield6 is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 08:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page