M030 Setup with Lowering Springs

[edc]

You will probably need some rear adjustable toe links and to extend the top mount slot for extra front neg camber.

[woodsman]

I THINK Topless is referring to the camber and toe curves being negatively affected by the LC arms being north of parallel once lowered deep enough. To remedy that you have to alter the pivot points of the arms.

[The Radium King]

Originally Posted by edc

You will probably need some rear adjustable toe links and to extend the top mount slot for extra front neg camber.

+1. you're good with suspension improvements unless you want to go full coilover and adjustable rear bar. put your energy into alignment and any parts needed to acheive that - rear links, front control arms (or camber plates, or slot your front strut towers) and front tie rods if you can't get the toe in spec.