I've been doing some research but I'll need some help from experts now. I found a thread where Tool Pants refers to an adapter PN 000 044 200 11. In his response there appears to be a picture of the adapter which apparently is a kit. Any way to find what PN's are in this kit. The adapter appears to be the same as the ebay bracket in bottom photo. The two parts diagrams are for the -99 (lower pic) and the 00- (top pic) the 5 speed adapter #6 on the -99 and #8 on 00- diagrams are the same PN. Does this indicate the same bolt pattern on the 5 speed trans for all years? And if this is the case will the ebay mount PN 996 111 226 02 same PN as the 02 diagram, work on my 98 to hang the 03 S muffler on?
Last edited by 911monty; 07-09-2015 at 05:49 PM.
Reason: update
You can just drill some new holes in the hanger plate on the S muffler. Then use new bolts to attach in the same place the old muffler was. You will also have to cut off the old bolts on the S muffler hanger. I have done this and it wasn't too much trouble. The hardest part is figuring where to drill the new holes so the muffler is centered. But since you can't see the hanger bracket when the bumper cover is on you can screw up a few times and it won't matter.
1998 Porsche Boxster
1998 Porsche 986
Hybrid Mode
