04-05-2006, 09:53 AM
|
#1
|
Registered User
Join Date: Sep 2005
Location: Minneapolis/St. Paul, Minnesota, USA
Posts: 3,308
|
Quote:
Originally Posted by briansboxster
I have had my 98 boxster in storage over the winter and have driven it a couple of times when it was not snowing. The airbag indicator dash lite stays on and some one told me that the battery charge could have dropped causing this and has to be reset, does anyone know how to do this without having to take it to the dealer?
Thanks Brian
|
Hi,
Disconnect the Battery and charge it, then reinstall it. Your light should go away unless it's a real fault in the SRS System. Hope this helps...
Happy Motoring!... Jim'99
|
|
|
04-05-2006, 10:20 AM
|
#2
|
Registered User
Join Date: Jul 2005
Location: Denver
Posts: 740
|
Make sure you have your Radio Code!!!!
__________________
'06 Cayenne Turbo S, Beige Metallic/Tan
Ex - '99 Arctic Silver, Red Interior, Silver Top
|
|
|
04-05-2006, 12:06 PM
|
#3
|
Registered User
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,243
|
Jim, you've suggested this before and it did not work for me.
The only way to get my airbag light off is to use a PST tool. Some CE lights can be cleared by disconnecting the battery for a while, but not my airbag light.
Brian, a common reason for airbag lights is the seatbelt receptacles go bad. Replacing both isn't expensive and might be a good move right about now for you, having a 98... both mine went out in my '97 this year.
|
|
|
01-28-2007, 05:09 PM
|
#4
|
Registered User
Join Date: Nov 2006
Location: Anchorage, AK
Posts: 172
|
Quote:
Originally Posted by RandallNeighbour
Jim, you've suggested this before and it did not work for me.
The only way to get my airbag light off is to use a PST tool. Some CE lights can be cleared by disconnecting the battery for a while, but not my airbag light.
Brian, a common reason for airbag lights is the seatbelt receptacles go bad. Replacing both isn't expensive and might be a good move right about now for you, having a 98... both mine went out in my '97 this year.
|
A Durametric may also reset your light. There's a thread in this forum of Durametric/PST2 owners and their locations. Although few have signed up, you might get lucky.
|
|
|
02-02-2007, 12:50 PM
|
#5
|
Registered User
Join Date: Jan 2007
Location: Dutchess County NY
Posts: 107
|
airbag light
My airbag light was on as well. I was told it was because the seatbelt receptical sensor was dirty. I was told to spray some contact cleaner in there then blow it out with a canned air or a compressor.
This made sense to me because when I unlatched my seatbelt the warning light didn't come on right away.. sometimes it would take a few seconds...sometimes a few minutes. So I cleaned it out and it corrected the problem. Now when I unlatch the seatbelt the indicator comes on immeadeatly. I took it to the mechanic to have the airbag light reset and it's been fine ever since.
Hope this helps. Good luck.
|
|
|
02-02-2007, 12:56 PM
|
#6
|
Registered User
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,243
|
That's really good information, and new to me. I replaced both of mine when they threw an airbag light and didn't think of doing this. Super news for the future, and it makes all kinds of sense too.
|
|
|
02-02-2007, 01:02 PM
|
#7
|
Registered User
Join Date: Dec 2005
Location: Coppell, TX
Posts: 317
|
Quote:
Originally Posted by Couper1
My airbag light was on as well. I was told it was because the seatbelt receptical sensor was dirty. I was told to spray some contact cleaner in there then blow it out with a canned air or a compressor.
This made sense to me because when I unlatched my seatbelt the warning light didn't come on right away.. sometimes it would take a few seconds...sometimes a few minutes. So I cleaned it out and it corrected the problem. Now when I unlatch the seatbelt the indicator comes on immeadeatly. I took it to the mechanic to have the airbag light reset and it's been fine ever since.
Hope this helps. Good luck.
|
What did you use as "contact cleaner"? My light has been on for months!
__________________
"97 Boxster" Guards Red, Coppell, TX 36,500 miles
2010 Mazda CX-7 AWD, Turbo, Grand Touring
|
|
|
02-03-2007, 11:55 AM
|
#8
|
Registered User
Join Date: Jan 2007
Location: Dutchess County NY
Posts: 107
|
Yes, I used a non-conductive contact cleaner. You can use this on all electrical components without shorting anything out. Let me ask you this, when you unlatch your seatbelt does your seatbelt indictor light and tone come on at all?? If it doesn't then maybe you do have a bad sensor and cleaning it won't help. As I said, in my case I knew the sensor was just dirty because the light and sound would come on and go off at different time whenever my seatbelt was unhooked.
Also, I was fortunate enough to have a local mechanic with the computer/tool to reset the airbag light, I didn't have to take it back to the dealer and pay their hourly rate. Most repair shops don't have the tools to reset Porsche lights.
Your third option would be a small piece of electrical tape over the airbag light. Lol, just kidding.
Let me know how you make out with it. Good luck
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 08:39 AM.
| |