3 Second 0-60 with a simple ECU re map
 

Hello everyone!

I am the ECU Doctor!

I have been experimenting with re mapping various make and model ECUs, to get maximum performance out of the factory car. I have had luck with Toyota and Chevrolet ECU's gaining about a 10-20hp gain from factory with a simple ECU remap.

I myself own a 2001 Boxster, it has been my test car. Everything on my car is bone stock, with the exception of a re mapped ECU. What is a re mapped ECU you may ask? Well I simply access the data on the ECU via a computer, change the values of the air/fuel/spark ratio and I can achieve great things (cant tell you all my secrets ;)

With the ECU remapped on my Boxster I can acheive 0-60 times in 3-3.5 seconds, thats a lot better then the 6 second stock time.

I am just trying to pass on my amazing discoveries to you! My fellow Porsche fanatics, if I get enough interest in this we can set up a group deal and get you guys running 3 second 0-60s in no time.

Thank you my friends! And happy Motoring :dance:

Video proof please? I've got my stopwatch ready.

Holy christ i actually just joined this site looking for advice on chips for my boxster LOL. I actually live 2 hours away from this fellow and i remember he made me a prom chip for my 91 z28 back in the day, which i was so surprised with the outcome even though it was around 20 horsepower. The throttle response was vastly increased so i can vouch for his camaro product. please share your finds for the boxster!

I have a feeling this is going to turn brutal :rolleyes:

Other than blaintaly posting in the wrong location.. Should be in classified or advertising, I sense the one time poster is going to get burned.

Pretty sure the OP and the voucher are the same guy.

Whoa 3 seconds in "no time" seems like it would totally mess up the space-time continuum. I think I'll remain in space-time.

WOW so awesome. I was going to try and swap in a 911 turbo engine. This seems much easier and cheaper. I should have enough money left over for a wheelie bar and a parachute. I'll pm you my cc and SS numbers right away :cool:

OP - please amend where you see fit:

List of fastest production cars by acceleration - Wikipedia, the free encyclopedia

Maybe between the Ferrari 458 Italia 2011 and Porsche 911 GT3 ?

I can assure you guys that I am not the voucher also.

I re map ECUs for the third gen camaro community, with great success and have made a decent living doing so, they dont call me the ECU Doctor for nothing.

My Boxster findings are very recent, I haven't dynoed the car yet to see the real gains but my stop watch shows a mere 3 second 0-60 time.

Going to hit the dyno in the coming weeks here to get you guys some real results, you guys will be amazed. I am not asking for any money or anything from anyone at this point. Was just seeing if there is any interest in my findings, not to be flamed. Please have faith in me the ECU Doctor. The things you can do with computers are just mind boggling.

Also I may add, I haven't determined the long term effects on this re map yet. Might have to adjust a few things to get it reliable and to last, once I am confident in my work I will open the offer to you guys.

I will post my dyno results as soon as I possibly can for you guys, as I said im super busy re mapping ECU's for customers outside hours of my day job.

Happy Motoring :) :dance:

You don't happen to work closely with a guy called My Gearbox Is in Bits On The Road Doctor, do you?

I can assure you that I do not! I test my work thoroughly before releasing it to the public.

I wouldn't own GP Performance if I was a hack

:dance:

hey paul does Gio still work for you? kinda wanted to see if he could come by sometime and give me a hand with getting the maro back on the road when you guys get some time.

Of course Giovanni still works for me! Just give the shop a ring one of these days and we will set you up

Oh we believe you!

The S 3.2 can even be brought up to 2.9secs no problem I'm sure by doing (1)wiping off the rev limiter and (2)advancing the timing from its 10degree up to let's say 14 degrees btdc among few other tricks (30degree?!). Given you use high octane and maintain a stable engine temp, there is nothing that say it wouldn't work. Problem is the Flat6 cast materials - good luck! 'Normally' we use a combination or magnesium and titanium in our gp prototype engine assemblies - no no cheap Porsche/production cast alloys lollll

Computers are boggling things yes, gravity and bare bone physics are another :D

I'm not a doctor, nor own a gp clinic, just the guy who knows how to 'machine' god's metals to 0.005mm tolerance for various WSBK race engineers (fast mopeds, very very fast ones)

Luck with your business and research on the pcar engines, sounds good!

I think 0-60 km/h in 3 seconds should be achievable ;-)

L
o
l
!
!
!

I'm with hemonu
It would appear you may have slowed down the Boxster's 0-60 (37.28 MPH) times
But I bet it gets better gas mileage now

If it is 60mph, I'll feel comfortable now that I won't have to worry about my IMSB.
The engine won't last long enough

ECU_Doctor are you the right hand sock puppet and iroczporsche is the left hand sock puppet?

Let the burn continue

It can't be legal in California. Nothing but a bone stock vehicle is anymore.:ah:

Excluding the current 918 Spyder (2.5 secs.), there is only one car in Porsche's current line up with a 3 second 0-60 (actual is 2.9). It's the 991 Turbo S with 560 HP. They start at $183 before any options.

Post vids!! I'm a bit of a skeptic regards to seeing that large of a difference, but then again I'm sure there is still a gain to be made with this

All while getting 200+ MPG! This thread is not going to end well...

Actually, with the new smog machines in CA that don't "sniff", I was able to pass with an ECU mod in my 2007 BMW. That surprised me for sure...

If you can do this with the Boxster, then you should be able to do it with the other flat 6 motors.
Please put a post on the Rennlist.com 996 forum. I am sure there will be lots of people interested

996 Forum - Rennlist Discussion Forums

:cheers:

Dr. Paul aka ECU Wizard, aka ECU Doctor
 

Paul,
We are a decent bunch but totally intolerant of B/S attempts to get in our wallets.
Compared to the 996 guys on Rennlist -we are choir boys. So the suggestion to try your luck on Rennlist is both helpful and positive.
Some reference/link to your Camaro triumphs may help your credibility? Not disputing your claims but to just dump a blatant ad in our Forum with no prior posts to your credit indicates(incorrectly ?) blind bumptiousness.
So you've had plenty of free exposure - now it is time to put up or ....
Proof please .

Gelb, too much info. I was so looking forward to the fun on the other forum.

The real wild west is on the Pelican Parts forum. Post it there and see who shows up for the hangin'.

I had smog two years ago and they still used a sniffer. Have to re smog this year so can you tell me what is involved please. Thanks!:cheers:

<Please excuse the off topic. We can get back to flaming ECU_Doctor straight away.>

I *think* it is 2006 and newer don't need a sniff. older still do. Call you smog station and find out if they have the new machine or not, not all have it...

In AZ it's any OBD II equipped car that they just plug in and don't bother with the sniff test. AZ usually follows what CA does, at least they used to. I just did mine a month ago and no problems with the secondary cats deleted.

I also own a 2001 Box, and I am very interested in what you claim. So where are you at on offering some type of group deal? You can PM me if you'd like, maybe that will avoid some of the skeptic flames being blazed in here at you.

Did some chips tuning for my other car a while ago. Engine runs much fatter now. :D

http://986forum.com/forums/uploads01...1423687388.jpg

Iroczporsche and the ecu doctor, it's funny that iroczporsche just joined, Id love to see a pic of your car.

Well my friends. It appears timco is bored and making new accounts [emoji33].

I'll believe it when we get a video.

Interested. I would imagine our cars would need about 450 to the wheels to get that time :)

Nope, only 400hp. Surprised you guys didn't know this. You don't need to have this guy do a tune for you. Just get a Durametric Enthusiast tool, go to the Performance options. There you will see a 3 second 0-60 option, just enable it. This gives the car 400hp and turns on the all wheel drive system that all 986's came with.

Not a chance. They have different screen names, and I'm not opening my wallet on any of these until the 0 - 60 time is under 2 seconds.

you forgot enabling NOS and the 007 ROW Jet Pack

Well, duh. He selected the 3 second option, no the 2 second option!

Funny stuff

This is the funniest thread I've read for some time.