08-07-2014, 07:42 AM
|
#1
|
|
Registered User
Join Date: Aug 2014
Location: Lancashire
Posts: 15
|
Boxster engine loom
Does a boxster have a seperate engine loom to the rest of the car?
as in, could you get the engine running on a stand.
Cheers
Rob
|
|
|
|
08-07-2014, 10:16 AM
|
#2
|
|
Registered User
Join Date: Aug 2004
Location: Alta Loma, CA
Posts: 1,334
|
No.
The ECU has to see the low voltage multi-millisecond pulse that comes from the immob. for the start signal.
I take a stock chassis harness and pair it down to exactly what I need to run them on a dyno..
I've done this now for 5-6 years. We typically can pull 20+ lbs out of a 986 harness. 987 Cayman harness? 28-30lbs!!
__________________
Engine Builds, Transmission Builds, Engine Conversions, Suspension Installs, Suspension Tuning, Driver Coaching, Data Acquisition, Video, SCCA/PCA/POC/NASA/GRAND AM/ALMS.
We have worked with amateur and professional drivers for over 26 years. In house machinist, In house fabrication. Our cars, our parts, our engines, our transmission's run nationwide at events every weekend. We work side by side with industry names developing parts.
|
|
|
|
|
08-07-2014, 10:29 AM
|
#3
|
|
Registered User
Join Date: Aug 2004
Location: Alta Loma, CA
Posts: 1,334
|
Here you go.. I test the harness before it goes back into the cars (and before we wrap it with the factory cloth tape.
__________________
Engine Builds, Transmission Builds, Engine Conversions, Suspension Installs, Suspension Tuning, Driver Coaching, Data Acquisition, Video, SCCA/PCA/POC/NASA/GRAND AM/ALMS.
We have worked with amateur and professional drivers for over 26 years. In house machinist, In house fabrication. Our cars, our parts, our engines, our transmission's run nationwide at events every weekend. We work side by side with industry names developing parts.
|
|
|
|
|
08-07-2014, 12:18 PM
|
#4
|
|
Registered User
Join Date: Aug 2004
Location: Alta Loma, CA
Posts: 1,334
|
__________________
Engine Builds, Transmission Builds, Engine Conversions, Suspension Installs, Suspension Tuning, Driver Coaching, Data Acquisition, Video, SCCA/PCA/POC/NASA/GRAND AM/ALMS.
We have worked with amateur and professional drivers for over 26 years. In house machinist, In house fabrication. Our cars, our parts, our engines, our transmission's run nationwide at events every weekend. We work side by side with industry names developing parts.
|
|
|
|
|
08-08-2014, 04:32 AM
|
#5
|
|
Registered User
Join Date: Aug 2014
Location: Lancashire
Posts: 15
|
hi brad, its for a rallycross car, so all i need is engine running, no lights etc.
as you have done it before, how much would you chard to cut down a loom for me?
Cheers
Rob
|
|
|
|
|
08-08-2014, 07:41 AM
|
#6
|
|
Registered User
Join Date: Aug 2004
Location: Alta Loma, CA
Posts: 1,334
|
Hi Rob,
what year car? is it right hand drive or left hand drive? I typically do them on exchange, but I'm **guessing** you have a right hand drive car and I won't have a harness done already for a right hand'r.
I have in stock: 97-99 and 00-03 BoxsterS
I also have a 06-09 987 6speed harness
__________________
Engine Builds, Transmission Builds, Engine Conversions, Suspension Installs, Suspension Tuning, Driver Coaching, Data Acquisition, Video, SCCA/PCA/POC/NASA/GRAND AM/ALMS.
We have worked with amateur and professional drivers for over 26 years. In house machinist, In house fabrication. Our cars, our parts, our engines, our transmission's run nationwide at events every weekend. We work side by side with industry names developing parts.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 09:27 AM.
| |
Linear Mode
