Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical chat

Reply
 
LinkBack Thread Tools Display Modes
Old 05-08-2014, 11:54 AM   #1
Registered User
 
Join Date: Mar 2014
Location: Florida
Posts: 24
Steel IMSB

If you have installed a replacement steel IMSB, which one did you install? Why?

If you are planning a new steel bearing installation, which one have you chosen? Why?

Thank you.

A.C.T.
mugwump is offline   Reply With Quote
Old 05-08-2014, 02:44 PM   #2
Beginner
 
Jamesp's Avatar
 
Join Date: Mar 2013
Location: Houston
Posts: 1,659
Garage
I replaced the stock NSK with a Nachi bearing with full Viton seals and high temp grease. I chose this because the Viton in the Nachi is a superior material at temperature and I wanted a higher temperature bearing. Choosing a fully sealed bearing was also important to keep the oil and grease separate. The caveat is I also modified my IMS shaft to eliminate the pressure differential in the IMS that will push oil through the bearing seals.
__________________
2003 S manual
Jamesp is offline   Reply With Quote
Old 05-09-2014, 07:11 AM   #3
Registered User
 
Join Date: Mar 2014
Location: Florida
Posts: 24
James,

Thank you for the reply. I appreciate your willingness to help. I have read several of your related posts with interest.

Best regards,

A.C.T.
mugwump is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:46 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page