Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-21-2014, 03:08 PM   #1
Registered User
 
Jinx's Avatar
 
Join Date: Apr 2014
Location: Pittsburgh
Posts: 158
Garage
245x45-17 tires

I have four 245x45-17 Ultra performance tires from my former ride
(2006) Audi TT. 3 months worth of wear on them. My question is
Can I use them on my new 2003 boxster, 17 inch wheels?

2. What is the purpose of using different size tires/wheels on a
Porsche?

Thank You.

__________________
Jinx & Bill
Jinx is offline   Reply With Quote
Old 04-21-2014, 04:41 PM   #2
Registered User
 
seningen's Avatar
 
Join Date: Jul 2008
Location: austin
Posts: 824
yes

you'll be a little wider up front than OEM and tad smaller in back.

Unless you track it -- the only thing you'll notice is a little harder to turn at slow speed

mike
__________________
Drivers: '15 Panamera Hybrid (wife's), ' 01 996 GT2, 00 Boxster S, '96 993 Çab/Tip (wife's)
Race Cars: '75 911 RSR Replica & '99 Spec Boxster
mike@lonestarrpm.com
seningen is offline   Reply With Quote
Old 04-22-2014, 09:39 PM   #3
Registered User
 
jb92563's Avatar
 
Join Date: Apr 2012
Location: Riverside, CA
Posts: 1,665
Bigger contact patch on the ground on the rears to transfer the hp to the road with good traction.

The front are just for steering and at that smaller size they under steer a bit, so for racing you upsize the fronts for better grip when turning and braking.

its typical of rear wheel drive cars to carry more rubber where its needed.
__________________
"It broke because it wants to be Upgraded "
2012 Porsche Performance Driving School - SanDiego region
2001 Boxster S, Top Speed muffler, (Fred's) Mini Morimotto Projectors, Tarret UDP,
Short Shifter, Touch Screen Dual Din Radio, 03 4 Bow glass Top (DD & Auto-X since May 17,2012)

Last edited by jb92563; 04-22-2014 at 09:41 PM.
jb92563 is offline   Reply With Quote
Old 04-23-2014, 02:51 AM   #4
Registered User
 
Join Date: May 2013
Location: Loveland, CO
Posts: 101
Specs from Tirerack, fits 7-9" wheel;
psquared39 is offline   Reply With Quote
Old 04-23-2014, 08:30 PM   #5
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Remember that the stock tire widths are 205 front and 255 in the rear. This setup gives the Boxster a good amount of understeer.

By going 245 "square" (same size tires in front and rear), the car will lose most of the inherent understeer and might possibly tend to oversteer. This type of handling can be challenging for some drivers (which is why Porsche built in understeer).

When running a square tire setup in Boxster racing, we have adjustable sway bars and use sway bar adjustments to keep the car balanced (not tending to understeer or oversteer). In your case, a stock Boxster does not have adjustable sway bars so if the car is tail happy, you're just going to have to be fast to catch it.

I'm not saying that the car will become unmanageable; in everyday regular driving you'll probably never notice it.

But... my guess is that you will figure out pretty quickly that the front end has a LOT more grip and if you start exploring just how far that grip goes then you may find the point where the rear loses grip before the front (oversteer). Or even if you're not the type to test out the limits of the front end grip, the same could apply in a situation where you have to make an emergency maneuver.

This may not be an issue but I wanted to let you know what to expect.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor

Last edited by thstone; 04-23-2014 at 08:52 PM.
thstone is offline   Reply With Quote
Old 04-24-2014, 04:48 PM   #6
Registered User
 
Jinx's Avatar
 
Join Date: Apr 2014
Location: Pittsburgh
Posts: 158
Garage
Smile

Jinx here again.
I first off want to say a Thank You for all your responses to my
Question.
I have joined PCA and have -- will sign up for a Car Control Clinic.
A question on my original question. I may do a auto cross and
A D E event just for the fun of it. HA I am nervous just talking
About this. But that is my next question.

As you can tell I hate to scrap the tires from the Audi. Cheap I
Guess. Can I use the 245's just on the backs and keep the front
Size stock. I am afraid of the oversteer.
Or should I just scrap the 245's
I am not one to sell things on E-bay ect.

Thanks again for all your help
Jinx

__________________
Jinx & Bill

Last edited by Jinx; 04-24-2014 at 05:23 PM.
Jinx is offline   Reply With Quote
Post Reply

Tags
tires , wheels


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 05:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page