size of the 'tripple square socket..?

[Jager]

Originally Posted by Gilles

required to remove the single weird bolt between the engine and gearbox..

I went to Sears and they told me that the 'triple square' sockets have to be special ordered, thanks in advance.

Regards, Gilles

.

I recommend getting a short bit (or cut one) so you can do something like this:

[Jamesp]

Originally Posted by Jager

I recommend getting a short bit (or cut one) so you can do something like this:

I found that area very tight and used a setup like this with a much shorter triple square bit. I one dremelled on in half from Autozone, about $15 for four sizes as I recall