|
Yes, the "new" ECU is not being recognized by the immobilizer. The ECU, immobilizer, and the key fob must all be replaced/swapped as a matched set (or you need access to a PIWIS to reprogram them to match).
This typically means that you'll also have to swap the key shaft from your existing key fob to the new key fob so the new key fob can mechanically turn the ignition switch.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
Last edited by thstone; 12-23-2013 at 02:42 PM.
|
Threaded Mode
