Misfire and fault code

[paulv]

I don't know if the older version of Durametric has Freeze Frame data access. If so, check that and post it here. Misfires are not necessarily caused by ignition issues -- can be mechanical or fuel delivery problems. Also, go to the actual values section on the Durametric and watch the misfire counts for that cylinder at idle and under higher rpms.

Regards,
paul...

[Robsducati]

Just removed the cylinder 6 coil pack (see below) guess I need a new one!

[paulv]

Originally Posted by Robsducati

Just removed the cylinder 6 coil pack (see below) guess I need a new one!

You certainly do need a new coil pack. You may still want to watch the misfires in the actual values to see if thee are other cylinders that are misfiring but not enough to reach the threshold to set a DTC.

Regards,
paul...