|
Hi Kenny, -- yes to the aligning with the bolt heads and to the spring perch- I too had to remove and recompress but it was because I had the upper spring perch misaligned with the cup in the car body.
Before I took the car off the jack stands, I ran the toe eccentrics through their travel and could get , what looked like, massive toe-in or, toe- out- this was at full-droop, mind you. I'm going to jack the rear up and look these two sets of eccentrics over. What have I reversed?????:chicken:
__________________
Death is certain, life is not.
|
Hybrid Mode
