05-15-2013, 12:56 PM
|
#1
|
|
Registered User
Join Date: Oct 2006
Location: New Paltz, NY 12561
Posts: 935
|
CEL after oil change & inspection
Had oil changed and NYState inspection. Two stops on the way home, car drives fine but before I turned the engine off in the garage I noticed the CEL? Anybuddy else have this kind of sequential event? Light is on but car runs well not badly and light is not pulsating. I checked to insure the gas cap was tight ( it is) and the oil cap is turned down tight. Any suggestions?
AKL
__________________
'02, Arctic Silver/Graphite Gray, 2.7, TIP, 2nd cat delete, Charlie Chan muffler,de-ambered, Braille Battery, clear tailights, painted bumperettes, clear third brake light, M030 sway bars, F shock tower braces, clear rear deck, '03 side vents.  15mm spacers fore & aft.
|
|
|
|
05-15-2013, 01:35 PM
|
#2
|
|
Registered User
Join Date: Dec 2007
Location: Seattle
Posts: 735
|
Get the error codes read, then someone can make a suggestion/guess as to what is happening.
__________________
2000S Ocean Blue Metallic- 116K
3X Water Pump, Clear side markers, Crios Mod, Front engine mount, Flywheel, clutch, RMS, AOS, MAF, serpentine belt, power brake vacuum line, battery, 2X CV boots, Fuel filter, Oil filler tube, 3X ignition switch, 90K service, gas cap
|
|
|
|
|
05-16-2013, 12:16 PM
|
#3
|
|
Registered User
Join Date: Oct 2006
Location: New Paltz, NY 12561
Posts: 935
|
Got my code readings
Finally got my Durametric hooked up and it shows Porsche code 80 - Secondary air injection & P code 208 Secondary air injection. Vacuum hose, solenoid or ?
Also my cam deviation (while I was at it) is -6.93 & - 3.65, anything to worry about here?
AKL
__________________
'02, Arctic Silver/Graphite Gray, 2.7, TIP, 2nd cat delete, Charlie Chan muffler,de-ambered, Braille Battery, clear tailights, painted bumperettes, clear third brake light, M030 sway bars, F shock tower braces, clear rear deck, '03 side vents. 15mm spacers fore & aft.
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 03:36 PM.
| |
