CEL after oil change & inspection
 

Had oil changed and NYState inspection. Two stops on the way home, car drives fine but before I turned the engine off in the garage I noticed the CEL? Anybuddy else have this kind of sequential event? Light is on but car runs well not badly and light is not pulsating. I checked to insure the gas cap was tight ( it is) and the oil cap is turned down tight. Any suggestions?

AKL

Get the error codes read, then someone can make a suggestion/guess as to what is happening.

Got my code readings
 

Finally got my Durametric hooked up and it shows Porsche code 80 - Secondary air injection & P code 208 Secondary air injection. Vacuum hose, solenoid or ?

Also my cam deviation (while I was at it) is -6.93 & - 3.65, anything to worry about here?

AKL