Paint your own center console?

[Flavor 987S]

Originally Posted by Tomikaze

i found that MAZDA SUNLIGHT SILVER from 2003 is a bang on match to the Alumalook trim in my car.

IDTS. That does not look like a color match to me.

[Tomikaze]

Maybe the photo doesn't do it justice. After a few coats, sanding and clear coat it's going to be hard to tell a difference. The metal flake content is the similar. The shade of silver is very close. That test piece is rough and flat with no clear.

Originally Posted by Flavor 987S

IDTS. That does not look like a color match to me.

[achillies]

03S . Bought an early console from Woody (no soft touch). Primer/Sand/Primer/Sand/Paint with rattle can from AutomotiveTouchUp/Cleared/Sanded w/1200/Last layer of Clear

It is good, not perfect but cost less than $90.

[Tomikaze]

Look good.

Originally Posted by achillies

03S . Bought an early console from Woody (no soft touch). Primer/Sand/Primer/Sand/Paint with rattle can from AutomotiveTouchUp/Cleared/Sanded w/1200/Last layer of Clear

It is good, not perfect but cost less than $90.

[P_Carfahrer]

Here is mine. Sprayed when doing complete exterior respray. Also painted the e-brake handle as it was severely faded. I like it much better than with the black soft touch. Sanding all the soft touch off and again after primer/sealer is a pain but it is so worth it.

[Tomikaze]

Originally Posted by Flavor 987S

IDTS. That does not look like a color match to me.

IDK... looks pretty close to me.

[Geof3]

Originally Posted by Tomikaze

IDK... looks pretty close to me.

Looks spot on actually! Nice work!