|
100% positive the projector housing tilts up. The motor is attached to a pivot on the inboard side of the projector housing and when the high beam is operator that motor shifts the projector upward and slightly outward. Ive had mine apart because this pivot is a ball and socket it unclipped and the light only pointed down. I had the HID lamp out the ingnitor out. the high beam lamp out. This was the only way to get 2 fingers underneath the socket and clip it back onto the ball for the motor. There is no flap as shown in the illustrations in an originally equipped 03 - 04.
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
|
Threaded Mode
