How do you un-clip the post CAT 02's????

[2K3_Boxster_S]

Boxster 2003 S

How do you un-clip the post CAT 02's???? I've tried push and pulling on the tab, can't seem to get it to release. Bentley manual is no help. I accidentally broke a wire installing bung entender on the Right side.

By the way these work wonderfully. eliminated all catalytic CELS. just have one for the right side because circuit is now broken.

http://www.fvd.de/us/en/Porsche-0/-/-/-/item/item_details/VID_13585841-VCD_63621411-gid_-sort_4-display_5-item_FVD111LAMSIM/-FVD111LAMSIM-Oxygen-Sensor-Simulator-%28Minicat%29.html

anyone know how this clip works??

[manolo]

I've plugged/unplugged mine many times. You push the tab in, not pull it. It may be a little stiff, sometimes pushing the connector together(like you are attaching the sensor) will help take some tension off it and allow you to push the tab down fully. If its cocked half-way, its difficult to remove it. Its better to push it back together and start over.

[Oaktown 986]

Originally Posted by manolo

I've plugged/unplugged mine many times. You push the tab in, not pull it. It may be a little stiff, sometimes pushing the connector together(like you are attaching the sensor) will help take some tension off it and allow you to push the tab down fully. If its cocked half-way, its difficult to remove it. Its better to push it back together and start over.

I used, on the precat O2's, a tiny flathead screwdriver. Made it a cinch.