5500-6000 RPM shifting

[Brucelee]

In everday driving, it would be prudent to shift between 2500-3500K for most driving. More when passing, on ramps etc. An S can be shifted lower as it has more torque.

If you keep shifting at 5500 all the time, expect to pay Mr Engine Rebuilder a visit sometime soon. Not to mention Mr. COP!

Good luck.

[Adam]

Yeah, definately not a good idea to shift at that rpm all the time. On the other hand I believe in exercising the engine so the needle goes very close to redline a few times each time I take the car out.

[Pilot2519j]

Hi rpm shifting will only be harmful for the engine and your gasoline consumption will suffer quite a bit. I've driven clutch since 1968 and have never abused the clutch. At the same time I don't baby the cars either. I shift depending on traffic conditions, if traffic is moving briskly I open my shifting at higher rpms than if traffic is slow, there I shift on lower end. I will still go through all the gears if traffic is moving above 30 mph.

[boxsterdude]

Thank you guys for your help. :dance: I had a feeling Porsche enthusiasts would know the answer. Porschekid you caught me! I actually bought the Boxster to learn how to drive a stick. I almost have the clutch down. I won't be racing the engine all the time any more, unless I'm having fun.

[ranbar2]

I also learned to drive a stick on my boxster. Prior to buying it (about a year ago) I got one lesson from my cousin, who has been driving stick for years, in his toyota corolla. Funny thing is that he hadn't had an opportunity to drive the boxster until this past weekend. After 15 minutes of his shifting, I thought I would have to go to the chiropractor. He also stalled it. I asked him what the problem was and he said that it has a much stiffer clutch than his, and that it was much more difficult finding the shift point because of the sound (he said that the turbine whine made him think he should shift alot earlier), and the low end torque. We finally got it on the highway and he opened it up to 100 mph still in 4th gear (just a bit north of 6k rpms). When he was done, he had had the biggest grin on his face. He asked me how many times I have actually gotten it to 6th. Well, to be truthful, it hasn't been that many.

As for me, I generally go from 1st to 2nd around 2500 - 3500, 2d to 3rd between 3000 and 4500 and higher shifts from 4000 up. A couple times a week I'll get closer to redline just to keep the engine honest. I find that when its cold (well, at least as cold is defined in Fla), I make my 1-2 shift alot lower. After a year, my "jerky" shifts have decreased greatly, although I still get a few daily. But when I do, the amount of "jerk" is usualy minimal. And my percentage of what I call natural shifts, when it seems like the shifter just falls into the gate and it doesnt even feel like the car has changed gears, has greatly increased. Like anything, with more practice you get to know your car.

Also, I don't do a whole lot of downshifting. Usually 3-2 on an off-ramp or if the light ahead has just changed and traffic is just starting to move. But if the light is red, I'll just roll up in neutral. I prefer to keep it in neutral while waiting for the light to change whereas my fiance, who has been driving sticks for 15 years, tends to keep it in 1st and ride the clutch. On the other extreme, I have a friend who goes to neutral even at a stop sign. One thing I am also still working on is my kneejerk reaction to hit the clutch whenever I even tap the brake.

Anyway, enjoy your car. It's a great way to learn how to drive a stick!

[Porschekid]

I find in normal driving I do alot of first to third shifting. Don't hit 2nd much unless trying to accelerate faster. Hills are still a ******************** for me though (really sucks in Pittsburgh) and I haven't got a good launching technique down. I feel bad learning on such a nice car but all other sticks I've driven the clutches feel alot different anyway.

[Adam]

Ranbar touched upon a real good point about keeping the revs low when the engine is cold. You will significantly shorten the life of the engine if you rev it high before it has a chance to warm up properly. I learned the hard way when I broke a lifter in my old 528i. The proper operating temp is around 185 degreees. Before the engine reaches this temp, you should not exceed 4,200rpm per Porsche. Consequently, this is also the rpm limit during "breakin" period. After the engine is warmed up, don't be afraid to rev it high from time to time...this is when the boxster starts to wake up.