|
Brad Roberts wrote:
>> 10. Let it idle again
>> 11. Repeat step 9
>> 12. Let it idle again
>> 13. Repeat step 9
>> 14. Let it idle
...
>> 20. Drive around a few days with the steel wire to the coolant expansion cap in the UP position.
>> 21. Keep checking the level while the wire is in the up position.
>>
>> Side note: we run with the wire UP everywhere ALL the time.
----------------------------------------------------------------------------------------------------
A few questions on this.
How long should it idle between revs ?
Any down sides to running with wire up all the time? Why wouldn't you want to do this?
thanks much
|
Threaded Mode
