Quote:
|
Originally Posted by blue2000s
Thom makes an excellent point about Chinese suppliers. One of the main issue that I've dealt with from Chinese suppliers is product consistency. Part to part variation can be ridiculously high.
However, as Che points out, there are some excellent manufacturers in China as well. But if you don't go there to inspect the facilities and ensure that they have all the appropriate tooling for manufacturing and quality control, chances are you're not going to end up with a quality product. Hopefully, Che's manufacturer has a continuous dimensional quality inspection process with some random destructive testing. There's a concern with raw material quality as received by the manufacturer as well, which leads to the need for rigorous incoming inspection measures.
A couple of members on this board reporting on how well the parts work shouldn't be enough proof for anyone who's really concerned about the quality of these parts.
|
I found this on the hardrace site, you may want to email them your concerns that you may have.
http://hardrace.com/precise.asp#2
Che, Could you look into possibly creating an aftermarket front engine mount and possibly transmission mounts... cause they are pricey like a mofo and they all eventually wear out as have the mounts on my boxster currently.
Threaded Mode
