Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-17-2007, 11:44 AM   #9
Registered User
 
Join Date: Oct 2006
Location: smyrna ga
Posts: 210
The transmission will work.

You will use the flywheel from your boxster engine as the 3.4 flywheel is thicker and will rub the bellhousing if used. A sport clutch was put in my boxster although I'm not entirely sure what that means in regards to it being a better boxster clutch or a 996 clutch.

You can use the muffler but for performance reasons you will want to get new headers and cats as your manifold will be too restrictive and the ones on the 3.4 are reversed because the engine sits reversed in the two models

In addition to the above your old engine will have to be a donor for some parts...such as the fuel rails if i remember correctly...again, because they are reversed.

I think there were a few other parts used as well but I do not remember which ones.
__________________
- ian
idheaton is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page