coolant flush...step by step with pics

[djomlas]

this is the Zerex used

then after its all out, close it and top off with coolant/distilled water mix to MAX

turn the car on, and let the engine get to the operating temerature, and every minute or so rev it up to about 4200RPM, this will take about 10 minutes or so.
shut engine off, let cool off, then top off to MAX again, put the bleeder valve down, replace the plastic cover, tighten both caps on.
some people like to drive w bleeder valve open for a day or 2, this will not hurt the car