986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post

djomlas · 01-26-2007, 09:20 PM

this is the Zerex used

then after its all out, close it and top off with coolant/distilled water mix to MAX

turn the car on, and let the engine get to the operating temerature, and every minute or so rev it up to about 4200RPM, this will take about 10 minutes or so.
shut engine off, let cool off, then top off to MAX again, put the bleeder valve down, replace the plastic cover, tighten both caps on.
some people like to drive w bleeder valve open for a day or 2, this will not hurt the car

01-26-2007, 09:20 PM	#2
djomlas Registered User Join Date: Sep 2006 Location: chicago Posts: 3,510	this is the Zerex used then after its all out, close it and top off with coolant/distilled water mix to MAX turn the car on, and let the engine get to the operating temerature, and every minute or so rev it up to about 4200RPM, this will take about 10 minutes or so. shut engine off, let cool off, then top off to MAX again, put the bleeder valve down, replace the plastic cover, tighten both caps on. some people like to drive w bleeder valve open for a day or 2, this will not hurt the car __________________ http://i34.tinypic.com/157yslk.jpg "I couldn't find the sports car of my dreams, so I built it myself." ~F. Porsche Gemballa springs::litronics::Eurotech 18s(275/225)::B&M::MOMO wheel:: exhaust cutouts::EVOcoldair intake::OEM smoked tails & sidemarkers:: colormatched bumperettes::Top Speed Pro-1 exhaust:: my cardomain/pictures page Last edited by djomlas; 01-27-2007 at 08:44 PM.