Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

Post Reply
 
LinkBack Thread Tools Display Modes
Old 01-12-2022, 04:07 PM   #1
Registered User
 
Join Date: Jun 2006
Location: Indianapolis, IN
Posts: 26
DIY: Repair HVAC Blend Doors using Plastic Plugs (i.e. fix for foam in air vents)

I was reading VW forums and noticed that the Golf/Jetta/Beetle/Passat have the same HVAC blend door foam issues that Porsches do. Some users have started using plastic plugs to block the holes in the blend doors. The size and number of those plugs looked very similar to the Porsche blend doors, so I ordered as set…and they fit!

I put together a quick video fo the installation process. Hopefully someone else finds this useful/helpful.
Porsche 911 Boxster Blend Door Repair Plugs (fix foam coming out of vents)

Video: https://youtu.be/ZiFFllCzlxc

DSP Blend Door Plugs

Carlton Bale is offline   Reply With Quote
Old 01-14-2022, 12:45 PM   #2
Registered User
 
Join Date: Jan 2014
Location: New Jersey
Posts: 1,631
Quote:
Originally Posted by Carlton Bale View Post
I was reading VW forums and noticed that the Golf/Jetta/Beetle/Passat have the same HVAC blend door foam issues that Porsches do. Some users have started using plastic plugs to block the holes in the blend doors. The size and number of those plugs looked very similar to the Porsche blend doors, so I ordered as set…and they fit!

I put together a quick video fo the installation process. Hopefully someone else finds this useful/helpful.
Porsche 911 Boxster Blend Door Repair Plugs (fix foam coming out of vents)

Video: https://youtu.be/ZiFFllCzlxc

DSP Blend Door Plugs
Cool! If I ever need to open mine up again I'll do it!
__________________
Current: 2022 718 Cayman GT4, PDK bone stock (the dark side).
Former: 2003 S, 3.6 LN Nickies, ARP rod bolts, under-drive pulley, Fabspeed sport headers, Softronic tune, 987 airbox 987 motor mount, Function-First Sport motor mount insert, Ben's short shifter, Nine8Six projector headlights & center caps, ROW M030, stainless flexible brake lines, B-K rollbar extension & fire extinguisher mount, hardtop
PaulE is offline   Reply With Quote
Old 01-17-2022, 06:38 AM   #3
Registered User
Those little plugs look like the way to go, well worth the cost. I've done that repair using fiberglass three times. The plugs would eliminate the mess and the curing time of fiberglass, saving about three hours on the whole project.
old911doc is offline   Reply With Quote
Old 01-17-2022, 08:38 PM   #4
Registered User
 
Join Date: Sep 2008
Location: Florida
Posts: 2,492
Great video, thanks for posting!
I feel so old school for using duct tape...Luckily, we don't get too cold here in NW Florida.
dghii is offline   Reply With Quote
Old 01-18-2022, 03:34 AM   #5
Motorist & Coffee Drinker
 
78F350's Avatar
 
Join Date: Jul 2014
Location: Oklahoma
Posts: 3,652
Garage
Quote:
Originally Posted by dghii View Post
... I feel so old school for using duct tape. ...
It is an HVAC *duct*, so ...correct use of the tape.
__________________
I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
78F350 is offline   Reply With Quote
Old 01-18-2022, 03:59 PM   #6
Registered User
 
Join Date: Jun 2006
Location: Indianapolis, IN
Posts: 26
I think the high-temp duct tape will work just as well as the plugs.

I didn’t know about the fiberglass repair option. That does sound labor intensive, especially for someone like me who is terrible at fiberglass work.
Carlton Bale is offline   Reply With Quote
Old 01-19-2022, 11:03 AM   #7
Registered User
 
Join Date: Jan 2014
Location: New Jersey
Posts: 1,631
Quote:
Originally Posted by Carlton Bale View Post
I think the high-temp duct tape will work just as well as the plugs.

I didn’t know about the fiberglass repair option. That does sound labor intensive, especially for someone like me who is terrible at fiberglass work.
I'm with you on that! It was hard enough getting the strips of aluminum tape in place, I couldn't imagine laying glass tape and brushing resin onto the bled doors using the shortcut method and not making a mess all over, and having the resin run down and possibly harden in places that would jam the doors. My hat's off to someone who can do that!
__________________
Current: 2022 718 Cayman GT4, PDK bone stock (the dark side).
Former: 2003 S, 3.6 LN Nickies, ARP rod bolts, under-drive pulley, Fabspeed sport headers, Softronic tune, 987 airbox 987 motor mount, Function-First Sport motor mount insert, Ben's short shifter, Nine8Six projector headlights & center caps, ROW M030, stainless flexible brake lines, B-K rollbar extension & fire extinguisher mount, hardtop
PaulE is offline   Reply With Quote
Old 01-30-2022, 08:01 AM   #8
Registered User
 
KevinH1990's Avatar
 
Join Date: Feb 2006
Location: Virginia
Posts: 1,658
Thank you for posting this information. I ordered my plugs and will install them before spring. I'm planning to use clear RTV sealant for a neater appearance. (I know it is unlikely that anyone else will ever see it.)
__________________
2000 Arctic Silver/Black, Hard Top, On Board Computer
PNP Rear Speakers, HAES 6-Channel Amp, Avic Z140BH,
Painted Bumperettes, 2004 (OEM) Top, Homelink integrated in dash with Targa switch, 997 Shifter, Carrera Gauge Cluster with silver gauge faces, heated 12-way driver & 8-way passenger seats, Litronics, silver console
KevinH1990 is offline   Reply With Quote
Old 02-06-2022, 04:29 PM   #9
Registered User
 
Join Date: Oct 2020
Location: KY
Posts: 1,216
Great video, thanks for posting!

I have a stupid question - why are there holes in these panels to start with?

Sent from my SM-G970U1 using Tapatalk
__________________
2000 Box Base, Renegade Stage 1 performance mods complete, more to come
When the owners manual says that the laws of physics can't be broken by this car, I took it as a challenge...
ike84 is offline   Reply With Quote
Old 02-07-2022, 03:23 AM   #10
Registered User
 
Join Date: Jun 2006
Location: Indianapolis, IN
Posts: 26
Quote:
Originally Posted by ike84 View Post
Great video, thanks for posting!

I have a stupid question - why are there holes in these panels to start with?
It's not a stupid question – that blend door is definitely a stupid design! My guess is that it was a cost reduction. The end result is about 1/3 less material.
Carlton Bale is offline   Reply With Quote
Old 02-08-2022, 05:17 PM   #11
Registered User
 
Join Date: Sep 2008
Location: Florida
Posts: 2,492
Quote:
Originally Posted by Carlton Bale View Post
It's not a stupid question – that blend door is definitely a stupid design! My guess is that it was a cost reduction. The end result is about 1/3 less material.
It isless mate rial but I'd bet there's another 'engineering' reason as you wouldn't cut different shape holes just to save materials.
dghii is offline   Reply With Quote
Old 02-09-2022, 03:06 AM   #12
Registered User
 
Join Date: Jun 2006
Location: Indianapolis, IN
Posts: 26
There definitely is an engineering reason to cut different shaped holes: To remove as much material as possible and still maintain the structural integrity of the part. The size and placement of each size of hole is proportional to the size of each panel.
Carlton Bale is offline   Reply With Quote
Old 03-11-2023, 01:23 PM   #13
Registered User
 
Join Date: Mar 2023
Location: Boone NC
Posts: 1
Did the plugs today and don’t you know the first one I tried to put in I dropped !! Anyone have any idea where it goes and if it can be retrieved ? It’s def not down in the bottom anywhere
Phnman23 is offline   Reply With Quote
Old 03-12-2023, 03:54 AM   #14
Registered User
 
Join Date: Jun 2006
Location: Indianapolis, IN
Posts: 26
I dropped a couple of plugs during the install. They fall down to the bottom of the blend door enclosure. They can be difficult to see, but to my recollection there is no “lower level of hell”. You should be able to retrieve it by hand. Try recording a video with your phone placed inside the vent enclosure to get a good view of everything. You can also get a cheap endoscope from Amazon:
Depstech Single camera endoscope



Having some RTV on your fingers helps keep it from getting away from you during insertion.
Carlton Bale is offline   Reply With Quote
Old 03-14-2023, 05:52 PM   #15
Registered User
 
randy328's Avatar
 
Join Date: Jul 2022
Location: DFW, Texas
Posts: 16
Just ordered. And I have a camera and pinchers already in case I start dropping them.
__________________
2003 Boxster S
randy328 is offline   Reply With Quote
Old 03-23-2023, 06:21 AM   #16
1998 Boxster Silver/Red
 
Join Date: Sep 2017
Location: 92262
Posts: 2,915
Plugs? Lol.

The wheel already has been invented, and it's called tape.
__________________
1998 Porsche Boxster
Starter986 is offline   Reply With Quote
Old 03-23-2023, 07:00 AM   #17
Registered User
 
Join Date: Feb 2005
Location: It's a kind of magic.....
Posts: 6,261
Quote:
Originally Posted by Starter986 View Post
Plugs? Lol.

The wheel already has been invented, and it's called tape.
Plug are actually a bit slicker fix, and never seem to come loose as the tape sometimes does.....
__________________
Anything really new is invented only in one’s youth. Later, one becomes more experienced, more famous – and more stupid.” - Albert Einstein
JFP in PA is offline   Reply With Quote
Old 03-24-2023, 03:00 AM   #18
1998 Boxster Silver/Red
 
Join Date: Sep 2017
Location: 92262
Posts: 2,915
Quote:
Originally Posted by JFP in PA View Post
Plug are actually a bit slicker fix, and never seem to come loose as the tape sometimes does.....
I used a 3M product designed for mitigating headlight/foglight chips. It comes pre-cut (I used it on a BMW) or in a sheet. I had both. It's ~1/8" thick with a nice adhesive. It's ne-ver coming off. No one ever will see it.
__________________
1998 Porsche Boxster
Starter986 is offline   Reply With Quote
Old 03-25-2023, 04:31 AM   #19
Registered User
 
Join Date: Jun 2006
Location: Indianapolis, IN
Posts: 26
My blend door is waaay better than your blend door.

Carlton Bale is offline   Reply With Quote
Old 03-25-2023, 04:38 AM   #20
1998 Boxster Silver/Red
 
Join Date: Sep 2017
Location: 92262
Posts: 2,915
Quote:
Originally Posted by Carlton Bale View Post
My blend door is waaay better than your blend door.

Yeah... I'd have to see pics.


__________________
1998 Porsche Boxster
Starter986 is offline   Reply With Quote
Post Reply

Tags
blend door , diy , foam , hvac , vent


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 11:39 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page