Quote:
Originally Posted by 911monty
Check out Mike Focke's thread on the soft top. He may have some photos of that end. Gotta run or I'll miss my tee time. Good Luck
|
Great, thanks. It did help with one issue. I do appear to have the lower cable attached correctly.
This is the pic on his site.
It's not easy to see, but the cable is attached just as I have it. it doesn't got straight up, but angles out at the bottom. I've put a green line on his, which is what I have and a red line on what i thought may have been the correct routing, but apparently isn't.
Now I know I need to concentrate my efforts on the other end that attaches to the aluminium plate. That's a pity as I'm not sure how much I'll have to undo and re-do including goop and double sided tape.
I'll count this as some progress!
Threaded Mode
