Carbon fiber center console fix needed

[Porsche9]

Originally Posted by madmodz

Contact glue and a heat gun should do the job. If the panel is warped out, use the heatgun to warp it into the console.

As simple as that? I wouldn't call the panel warped but simply pulled away. I'll apply some heat to make it easier to work with before glueing and putting some clips on to hold in place while the glue cures. Thanks.

[madmodz]

Originally Posted by Porsche9

As simple as that? I wouldn't call the panel warped but simply pulled away. I'll apply some heat to make it easier to work with before glueing and putting some clips on to hold in place while the glue cures. Thanks.

Same exact thing happened to me. The piece on the console by the handbrake started peeling off. I glued it, then put clamps on it and hit it with a heat gun to get rid of the warp.