Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

Reply
 
LinkBack Thread Tools Display Modes
Old 07-12-2016, 12:14 PM   #1
Registered User
 
Join Date: Feb 2016
Location: London
Posts: 79
How to: Replace ignition coil tubes and seals (with video)

Eagle eyed viewers may have noticed the oil leak when I replaced my spark plugs and ignition coils a few episodes ago. This is because the rubber o-rings that seal the coil tubes fail over time and allow oil to pass through.

Here's my step by step video guide to removing the tubes and replacing the seals:
https://youtu.be/B0y3htZBGxc



Car used Porsche Boxster S 2001 986

7 bolt part no. 333 from B&Q (UK)
Coil tubes - (996 105 325 52)
Coil sleeve O-ring (rear) - (999.707.343.40)
Coil sleeve O-rings (front) - (999.707.215)
neil_b is offline   Reply With Quote
Reply

Tags
coil , guide , igntion , seals , tubes


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page