05-18-2021, 11:03 PM
|
#481
|
|
Ben-Auto-Design
Join Date: Oct 2014
Location: French Riviera
Posts: 827
|
With my plenum the throttle body stays in the normal position and doesn't rub anywhere.
With 911 plenum it's another story 
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
|
|
|
|
05-19-2021, 01:30 AM
|
#482
|
|
Ben-Auto-Design
Join Date: Oct 2014
Location: French Riviera
Posts: 827
|
I did a bit of reverse engineering on my own part now that I have a scanner !
here is the superposition of a stock 986 plenum, and my carbon fiber one !
As you can see, the transition is more straight between the two tubes and it has nicer bends.
For that I had to move the throttle body to the left and forward a bit to clear the starter solenoid !
What took months before would take only hours now !
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
|
|
|
|
|
05-19-2021, 06:02 AM
|
#483
|
|
Registered User
Join Date: Oct 2020
Location: KY
Posts: 1,216
|
Quote:
Originally Posted by Ben006
I did a bit of reverse engineering on my own part now that I have a scanner !
here is the superposition of a stock 986 plenum, and my carbon fiber one !
As you can see, the transition is more straight between the two tubes and it has nicer bends.
For that I had to move the throttle body to the left and forward a bit to clear the starter solenoid !
What took months before would take only hours now !
|
I'm not sure how that would fixing the rubbing? My 996 plenum is a straight T and the issue is space between the starter housing and the engine cover, not the angle of the plenum. Also, if you've changed the angle/location of the TB, is there enough play in the stock piping to make up for this? My stock intake is long gone but from what I remember there's very little if any play in those accordion sections.
Sent from my POCOPHONE F1 using Tapatalk
__________________
2000 Box Base, Renegade Stage 1 performance mods complete, more to come
When the owners manual says that the laws of physics can't be broken by this car, I took it as a challenge...
Last edited by ike84; 05-19-2021 at 06:43 AM.
|
|
|
|
|
05-19-2021, 06:22 AM
|
#484
|
|
Ben-Auto-Design
Join Date: Oct 2014
Location: French Riviera
Posts: 827
|
Well, mine doesn't rub because the throttle is where is was stock. No above the starter solenoid wich makes it too high.
you can not reuse the stock intake tube if you go to a bigger throttle body.
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
|
|
|
|
|
09-08-2021, 07:57 PM
|
#485
|
|
Registered User
Join Date: Dec 2018
Location: Saylorsburg, Pa/Rockaway,NJ
Posts: 30
|
Quote:
Originally Posted by Ben006
Well, mine doesn't rub because the throttle is where is was stock. No above the starter solenoid wich makes it too high.
you can not reuse the stock intake tube if you go to a bigger throttle body.
|
Now that some time has passed. Any luck with some dyno runs? Curious to see the numbers. Definitely interested if theres some good gains and they come back in stock.
Sent from my iPhone using Tapatalk
|
|
|
|
|
09-08-2021, 11:45 PM
|
#486
|
|
Ben-Auto-Design
Join Date: Oct 2014
Location: French Riviera
Posts: 827
|
Not really unfortunately, I've been too busy building the company for the last 6 months :/
I have a customer that picked up around 30Hp with the plenum, exhaust, and a tune on his 2.7L 986.
Right now I'm testing the 996 version. it still needs a bit of work...
I had a youtuber that was supposed to come (piston Kirk) but due to COVID he couldn't make it. We'll see in the winter if he can come and we'll do a back to back dyno with the plenum installed and removed.
Ben
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
|
|
|
|
|
09-09-2021, 07:52 PM
|
#487
|
|
Registered User
Join Date: Dec 2018
Location: Saylorsburg, Pa/Rockaway,NJ
Posts: 30
|
Quote:
Originally Posted by Ben006
Not really unfortunately, I've been too busy building the company for the last 6 months :/
I have a customer that picked up around 30Hp with the plenum, exhaust, and a tune on his 2.7L 986.
Right now I'm testing the 996 version. it still needs a bit of work...
I had a youtuber that was supposed to come (piston Kirk) but due to COVID he couldn't make it. We'll see in the winter if he can come and we'll do a back to back dyno with the plenum installed and removed.
Ben
|
The shop I work at has a dyno if you’re going to get these back in stock soon and want some solid data
Sent from my iPhone using Tapatalk
|
|
|
|
|
09-10-2021, 01:02 PM
|
#488
|
|
Registered User
Join Date: Jan 2014
Location: New Jersey
Posts: 1,631
|
Quote:
Originally Posted by Rpetrecz
The shop I work at has a dyno if you’re going to get these back in stock soon and want some solid data
Sent from my iPhone using Tapatalk
|
And I'm a customer of that shop if you need a car to test it on! They already have the "before" dyno data on my car!
__________________
Current: 2022 718 Cayman GT4, PDK bone stock (the dark side).
Former: 2003 S, 3.6 LN Nickies, ARP rod bolts, under-drive pulley, Fabspeed sport headers, Softronic tune, 987 airbox 987 motor mount, Function-First Sport motor mount insert, Ben's short shifter, Nine8Six projector headlights & center caps, ROW M030, stainless flexible brake lines, B-K rollbar extension & fire extinguisher mount, hardtop
|
|
|
|
|
10-06-2021, 11:31 AM
|
#489
|
|
Registered User
Join Date: Aug 2013
Location: Canarias (Small island on African coast)
Posts: 44
|
Hi Ben
Have you made something for the 987 3,2?
|
|
|
|
|
10-07-2021, 12:16 AM
|
#490
|
|
Ben-Auto-Design
Join Date: Oct 2014
Location: French Riviera
Posts: 827
|
Quote:
Originally Posted by Rpetrecz
The shop I work at has a dyno if you’re going to get these back in stock soon and want some solid data
Sent from my iPhone using Tapatalk
|
Quote:
Originally Posted by PaulE
And I'm a customer of that shop if you need a car to test it on! They already have the "before" dyno data on my car!
|
Thanks guys !
I'm waiting on a few tools to make a V1.2, easier to fit and a bit better looking
Quote:
Originally Posted by El Vikingo Tropical
Hi Ben
Have you made something for the 987 3,2?
|
I'm not sure of how the 3.2 987 inake is !
Is it the same as the 3.4 m97 or the same as the 3.2 m96 ?
if it's like the 3.4, I was to supposed to scan a car to finish the part... but the owner couldn't make it.
So I'm waiting on another occasion !
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 03:47 AM.
| |
Boxster S
Linear Mode
