Ball bearing short shifter !

[tommy583]

Looks perfect. Let us know how they work and when we can get them.

[shockandawe]

I want one put on the order for 1

[maytag]

Et alors? Quand je peut en avoir? ;-)

Sent from my SM-G970U using Tapatalk

[Boxstard]

Count me in!

[Ben006]

I installed it on my car for testing.
Since I already had a prototype on it, I know that it good, the last question will be the steel shaft that I haven't received yet !










Ben

[mgfranz]

Originally Posted by Ben006

I installed it on my car for testing.
Since I already had a prototype on it, I know that it good, the last question will be the steel shaft that I haven't received yet !




Ben

So where can we purchase this?

[Ben006]

You can’t yet

I want to make sure everything is right first ! I already found an area that needs improvement ! No big deal but I want it perfect because releasing them

[mgfranz]

Originally Posted by Ben006

You can’t yet

I want to make sure everything is right first ! I already found an area that needs improvement ! No big deal but I want it perfect because releasing them

Keep us informed, I already have a short shifter.

[shockandawe]

Any news on the part?

[particlewave]

I applaud your efforts, Ben.
However, running a round aluminum ball against a flat plastic surface is going to leave you with the same issue: play will develop quickly as the ball wears a groove into the plastic sleeve.
You need something more like the stock insert for the ball joint in order to distribute the load.

[mgfranz]

Want, want, want... Where is it?

[palmhero]

Ben, where can I buy your short shifter?

[Ben006]

Originally Posted by particlewave

I applaud your efforts, Ben.
However, running a round aluminum ball against a flat plastic surface is going to leave you with the same issue: play will develop quickly as the ball wears a groove into the plastic sleeve.
You need something more like the stock insert for the ball joint in order to distribute the load.

I chose the delrin insert, it's easier to make !
Since the ball rides on only a small part, each insert can be used twice, and you'll get two with each kits.
That should be enough to last a few years
And even after that, I won't sell the inserts for a crazy price, I want my parts to continue working for a looong time

I made a small modification, and the production will start soon

palmhero, if you are in the US, check with Uniwerksdesign.com


Ben

[palmhero]

I am in EU

[Ben006]

Then you can get one directly from my website : benautodesign.fr

I have some in stock but I need to assemble them, doesn't take long for one

[palmhero]

Ben, your Paypal checkout fails on the website:

Error in Paypal
Unexpected error occurred.

[pfbz]

Checking in on the progress on the yoke upgrade.... Looking to order a kit but would prefer to upgrade the yoke at the same time.

[Ben006]

The second prototype is done (I changed a dimension 1mm...)
Now the production should start this week !

[M1NDCRlME]

Ben any update?

[Ben006]

They are on my way should be there during the week !