03-17-2016, 05:40 PM
|
#241
|
|
Registered User
Join Date: Oct 2012
Location: Cincinnati, Ohio
Posts: 373
|
Received today.
Thanks Ben
|
|
|
|
03-17-2016, 05:55 PM
|
#242
|
|
Registered User
Join Date: Dec 2012
Location: FL
Posts: 4,144
|
Got mine today too.
|
|
|
|
|
03-17-2016, 07:35 PM
|
#243
|
|
Registered User
Join Date: Sep 2011
Location: Reno, NV
Posts: 148
|
G
Got mine too, looks nice,
thanks Ben
|
|
|
|
|
03-18-2016, 08:08 AM
|
#244
|
|
Tyler
Join Date: Sep 2015
Location: North Carolina -> New York -> Georgia
Posts: 52
|
I'll jump on the bandwagon - got mine yesterday!
Any tips or links to threads on installation would be appreciated.
Thanks Ben!
|
|
|
|
|
03-18-2016, 12:58 PM
|
#245
|
|
Ben-Auto-Design
Join Date: Oct 2014
Location: French Riviera
Posts: 827
|
Here is what you should get in the box:
The center section might have the bearing already fitted to it
Or in the cups:
It doesn't really matter, it all comes together the same!
Always leave the "one cent washer" in there (cheapest soft metal washer that fit!).
If one bearing get stuck in the cup, if you've follow the previous rule, you will have no trouble getting it out using the big set screw.
I recommend you to do the job outside the car, it takes only 4 more screws to undo, but makes it really easy.
If during installation the first bearing keeps on falling, a drop of super glue will secure it. JUST A SMALL DROP 
The pelicanpart article about the short shifter installation is very good, that's what I've used the first time I did it.
The hardest parts are getting the center console out, and breaking the old plastic cups (small chisel will do the job, the white plastic is brittle and will easily break if you hit the right spot without damaging the soft black plastic.)
Good luck with your install guys! I hope you will enjoy it as much as I, and the other do 
Also, there is one left to grab
Ben.
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
|
|
|
|
|
03-18-2016, 01:22 PM
|
#246
|
|
Registered User
Join Date: Apr 2014
Location: Seattle
Posts: 362
|
One left?
I replied to your PM Ben. Hoping that one will come my direction
__________________
2000 Boxster S, SPEC stage 1 clutch, Fabspeed sport headers, Fabspeed secondary cat deletes, Billy&Boat muffler, EVOM air intake, Ben006's Custom Short Shifter, Pedro's TechnoBrace, Eibach rear sway bar, De-snorkeled, Fred's custom projector HL
Last edited by Dubaday; 03-18-2016 at 01:27 PM.
|
|
|
|
|
03-20-2016, 04:51 PM
|
#247
|
|
Tyler
Join Date: Sep 2015
Location: North Carolina -> New York -> Georgia
Posts: 52
|
I installed mine today. Went in perfectly. Feels great. Thanks Ben!
|
|
|
|
|
03-20-2016, 05:30 PM
|
#248
|
|
Ben-Auto-Design
Join Date: Oct 2014
Location: French Riviera
Posts: 827
|
cool
It can feel weird the first days for some...
You might also want to check and adjust it if needed in a few weeks.
Ben.
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
|
|
|
|
|
03-20-2016, 06:15 PM
|
#249
|
|
1998 Boxster Owner
Join Date: Mar 2015
Location: Alviso, CA
Posts: 231
|
Quote:
Originally Posted by Ben006
cool
It can feel weird the first days for some...
You might also want to check and adjust it if needed in a few weeks.
Ben. |
If adjustment is needed what is to be adjusted. Haven't installed mine yet just asking.
|
|
|
|
|
03-20-2016, 06:34 PM
|
#250
|
|
Ben-Auto-Design
Join Date: Oct 2014
Location: French Riviera
Posts: 827
|
Just the set screw:
no need to take everything apart, you should be able to adjust it by hand (Undo the nut, tighten the screw by hand).
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
|
|
|
|
|
03-21-2016, 08:03 AM
|
#251
|
|
Registered User
Join Date: Aug 2015
Location: Fulshear, TX
Posts: 266
|
Got mine. Can't wait to install it.
Dave in TX
|
|
|
|
|
03-21-2016, 05:52 PM
|
#252
|
|
Registered User
Join Date: May 2015
Location: Sydney, Australia
Posts: 335
|
Received in Australia, thanks!
Now to pluck up the courage to break the plastic bits on the old one...
|
|
|
|
|
03-21-2016, 06:00 PM
|
#253
|
|
Ben-Auto-Design
Join Date: Oct 2014
Location: French Riviera
Posts: 827
|
That was fast!
It took me around 15min and three re-reading of the tutorial to finally do it, but you'll see, it's worth it
Ben.
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
|
|
|
|
|
03-27-2016, 04:24 PM
|
#254
|
|
Ben-Auto-Design
Join Date: Oct 2014
Location: French Riviera
Posts: 827
|
Hi guys!
I had 5 people waiting for the next round!
Who else's in?!
Ben.
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
|
|
|
|
|
03-27-2016, 05:24 PM
|
#255
|
|
98 Arctic silver 986
Join Date: Jul 2011
Location: Upstate, NY
Posts: 1,452
|
I'm in........................................
|
|
|
|
|
03-28-2016, 06:17 PM
|
#256
|
|
Registered User
Join Date: Jun 2015
Location: MN
Posts: 65
|
So I just installed my new shifter and matches my marking on the cables when I reattached them and it seems like it's tight and it takes slightly more force to get into each gear. I just want to verify it should feel like this. It feels solid just different.
Sent from my iPhone using Tapatalk
__________________
2001 Boxster S Arctic Silver : LN IMS Retrofit, Sport Package, AUX cable mod, de-snorkeled.
|
|
|
|
|
03-28-2016, 07:11 PM
|
#257
|
|
Ben-Auto-Design
Join Date: Oct 2014
Location: French Riviera
Posts: 827
|
Yes, the throw being 30% shorter, you need 30% more force to shift.
You'll get use to it don't worry, mine felt weird for a week
Ben.
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
|
|
|
|
|
03-28-2016, 07:26 PM
|
#258
|
|
Registered User
Join Date: Jun 2015
Location: MN
Posts: 65
|
Ball bearing short shifter !
Thanks for confirming. I'm excited to get out and drive it tomorrow to test it out.
Thanks again for putting together this high quality shifter!
Sent from my iPhone using Tapatalk
__________________
2001 Boxster S Arctic Silver : LN IMS Retrofit, Sport Package, AUX cable mod, de-snorkeled.
|
|
|
|
|
03-29-2016, 03:59 AM
|
#259
|
|
Registered User
Join Date: Oct 2012
Location: Cincinnati, Ohio
Posts: 373
|
Should feel like a rifle bolt. Mine does.
|
|
|
|
|
03-29-2016, 11:02 AM
|
#260
|
|
Registered User
Join Date: Apr 2014
Location: Seattle
Posts: 362
|
received mine last thursday, I know what I'm doing this weekend... 
__________________
2000 Boxster S, SPEC stage 1 clutch, Fabspeed sport headers, Fabspeed secondary cat deletes, Billy&Boat muffler, EVOM air intake, Ben006's Custom Short Shifter, Pedro's TechnoBrace, Eibach rear sway bar, De-snorkeled, Fred's custom projector HL
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 06:35 PM.
| |
Red Box
Ocean blue
1998 Porsche 986
Linear Mode
