Looks perfect. Let us know how they work and when we can get them.

Can’t wait
 

I want one put on the order for 1

Et alors? Quand je peut en avoir? ;-)

Sent from my SM-G970U using Tapatalk

Ben, I'll test it or you!
 

Count me in!

I installed it on my car for testing.
Since I already had a prototype on it, I know that it good, the last question will be the steel shaft that I haven't received yet !

https://i53.servimg.com/u/f53/13/27/76/86/img_7726.jpg
https://i53.servimg.com/u/f53/13/27/76/86/img_7729.jpg
https://i53.servimg.com/u/f53/13/27/76/86/img_7725.jpg
https://i53.servimg.com/u/f53/13/27/76/86/img_7724.jpg
https://i53.servimg.com/u/f53/13/27/76/86/img_7727.jpg
https://i53.servimg.com/u/f53/13/27/76/86/img_7730.jpg
https://i53.servimg.com/u/f53/13/27/76/86/img_7731.jpg


Ben

So where can we purchase this?

You can’t yet :)

I want to make sure everything is right first ! I already found an area that needs improvement ! No big deal but I want it perfect because releasing them :)

:cheers: Keep us informed, I already have a short shifter.

Shifter
 

Any news on the part?

I applaud your efforts, Ben.
However, running a round aluminum ball against a flat plastic surface is going to leave you with the same issue: play will develop quickly as the ball wears a groove into the plastic sleeve.
You need something more like the stock insert for the ball joint in order to distribute the load.

Want, want, want... Where is it?

Ben, where can I buy your short shifter?

I chose the delrin insert, it's easier to make !
Since the ball rides on only a small part, each insert can be used twice, and you'll get two with each kits.
That should be enough to last a few years ;)
And even after that, I won't sell the inserts for a crazy price, I want my parts to continue working for a looong time :)

I made a small modification, and the production will start soon :D

palmhero, if you are in the US, check with Uniwerksdesign.com ;)


Ben

I am in EU

Then you can get one directly from my website : benautodesign.fr

I have some in stock but I need to assemble them, doesn't take long for one ;)

Ben, your Paypal checkout fails on the website:

Error in Paypal
Unexpected error occurred.

Checking in on the progress on the yoke upgrade.... Looking to order a kit but would prefer to upgrade the yoke at the same time.

The second prototype is done (I changed a dimension 1mm...)
Now the production should start this week !

Ben any update?

They are on my way :D should be there during the week !