Porsche Wind Deflector with Edge Lighting [from CAD, prototyping to finish]

[JonD]

Originally Posted by hemonu

@JonD:
I had the same problem. But it was a matter of the right pulling force. I pulled quite hard at both upper ends of the frame and one end moved a bit. From that it was possible to go on all around the window.

Herbert

Herbert since you saw what I wrote before. There's actually a VERY simple no force way to remove the Perspex, In fact NO effort at all.

Get a flat screw driver one that fits between the Perspex and the frame (there's a tiny gap at the TOP of the frame). Lever it a little and gently pulling towards the frame the Perspex tab just pops out away from the frame then it just comes out.


Really simple and no effort actually