Porsche Wind Deflector with Edge Lighting [from CAD, prototyping to finish]

[hemonu]

@JonD:
I had the same problem. But it was a matter of the right pulling force. I pulled quite hard at both upper ends of the frame and one end moved a bit. From that it was possible to go on all around the window.

Herbert

[JonD]

Originally Posted by hemonu

@JonD:
I had the same problem. But it was a matter of the right pulling force. I pulled quite hard at both upper ends of the frame and one end moved a bit. From that it was possible to go on all around the window.

Herbert

Herbert since you saw what I wrote before. There's actually a VERY simple no force way to remove the Perspex, In fact NO effort at all.

Get a flat screw driver one that fits between the Perspex and the frame (there's a tiny gap at the TOP of the frame). Lever it a little and gently pulling towards the frame the Perspex tab just pops out away from the frame then it just comes out.


Really simple and no effort actually

[Nine8Six]

Nice one Jon, good visual thx man. Looks too easy lolll

[JonD]

Originally Posted by Nine8Six

Nice one Jon, good visual thx man. Looks too easy lolll

Thanks Fred glad I could contribute something at least. The pic is someone else's (Fintro) can't take credit for that, I just added the down arrow and the writing

I think some people may be able to pull the frame away easily, unfortunately mine was stuck like it was glued in, I nearly gave up trying and was going to see if I could buy another frame, as a last resort I tried the screw driver and was amazed how easily it popped out So I thought I'd share in case someone else experiences the same problem as I did.

Cheers

Who was it that said "Give me a long enough lever and I will move the Earth"? Hint he was Greek