Yikes! Apologies for the late one

Seen your post y'day but was stuck out of town and my mobby's VPN just wouldn't want to connect for some weird reason. That's right, 986forum is blocking conn coming from China.... we also need to buy VPN services to access most networks (youtube, twitter, 986forum, etc lol)

The update is.... I got all the electronics sorted this week so now it's off to testing the kit is harsh environments. 48hrs in the oven @ 120F non-stop and the same going on in the freezer at -4F. What I do is swing the "powered-on" kit back and forth in cold/hot/cold/hot. If it survives then I'll let those kits go out - not before!

I'll get some pics taken tomorrow and update soon.

p.s. slow progress... last weekend was our monthly Porsche car weekend out and this Saturday was my dogs' 3 years old birthday (out of town). Read correct... the dogs birthdays are celebrated. I know... I have pretty weird hobbies I tell ya lol

and tmrw the wife wants me to decorate the house and get it ready for xmas (she is hosting this year, not me lol). Can't believe it... more LEDs :eek:

Busy Busy!!!

A quick update on the "Skybreaker" wind deflector.

I have to admit that I am very surprised nobody flamed me for using that silly product name (yet anyway!). It's like calling your newly established budget Airline company "CloudCrasher". What if the skybreaker break... or what if it that new airline crashes... nah? whatever.... lol

Made a mistake to light ON the prototype (HUD) during our last weekend's Porsche car outing (yes, I had it lit up on my Boxster lol). A curious friend uploaded a few pics of that funny "ironman-style" HUD on the local pcar forum here and I got PM'ed with requests minutes after. How funny. Long story short, I have to plan making 10 additional kits for the guys owning 986s here lol Some facts and figures: there are about twenty-one (21) 986s in China only (that our little community knows of anyway).

Here goes a few shots of the electronic. That PWM box design and assembly is final and being wrapped up this week - nice little kit in all, I have to tell myself lol. Robust!


http://986forum.com/forums/uploads01/011418608248.jpg

^ Here is a grab of what the internals looks like. Following recommendations, I've included a micro Molex connector between the controller and the wind deflector. That way if you want to remove your deflector (e.g. for cleaning) then the only thing you need to disconnect is that little micro connector (idea from member rfuerst911sc). The other end, the red + black wires goes to car's 12V. Most likely I'll be using the ashtray's light 12v but also looking at a dash option. Still unsettled on where to tap the 12v lol.... too many places I guess


http://986forum.com/forums/uploads01/021418608258.jpg

^ The LED strip and the molex micro connector. The molex conn is 4mm wide X2mm thick. Shouldn't be hard to hide! I've soldered and secured the connection at both end, added a drop of industrial epoxy and wrapped it as far as possible with a quality heat shrinkable tube to prevent any lose up due to vibrations. Feels tight, solid. Works for me.


http://986forum.com/forums/uploads01/031418608268.jpg

^ Adding to the inventory of parts required to put this deflector :/ How miniature. This is laser-cut from 1mm thick silicon rubber. Goes where the wires mates on the controller. Prevents damage to the wires when kinked or bent. Act as a shock absorber lolll Seriously, without it and with time, the wires would get damaged by the sharp edge of the aluminum-made controller box. So that's sorted.


http://986forum.com/forums/uploads01/041418608277.jpg

^ Two leads of 3meter long each will be provided with the kit. Sufficient cabling for both ways e.g. whether you want to locate your controller behind the driver seat, or in the dash, there should be plenty of wires to play with there. The cabling is 26AWG gauge.... plenty to carry the small 90mA that the LED requires to fire up. Cable size is OD 3MM so again, easy to snake anywhere and hide (small is better, sometimes!).


http://986forum.com/forums/uploads01/051418608289.jpg

^ So that's what going on inside the controller box. I use some pretty wicked epoxy and have been since 10 years. I use the same stuff to secure the wires inside that controller. Everything that contact this epoxy is clean using acetone before... or in other words, locked for life. I also use epoxy to secure the contact screws and the board's mounting points. Nothing moves there and again, to prevent any vibrations from losing up things.


http://986forum.com/forums/uploads01/061418608301.jpg

^ This box is not serviceable (sealed). Not shown in the picture is a back cover made out of 2mm thick cast acrylic. It is opaque and mate black finish. This will also be epoxy onto the back of the controller box. Can't be opened once sealed. This is prevent the nine8six $7,238 worth high tech from being spied onto.... what if this falls into the wrong hands LOL


http://986forum.com/forums/uploads01/071418608316.jpg

^ Shot of those nasty-to-make PWM controller boxes, the 25 boards, some cabling I've prep already, what else... not much really. Needs assembly, any volunteers?!


http://986forum.com/forums/uploads01/081418608327.jpg

From the look of things as they are now, all it needs is kit assembly + Porsche Boxster Installation!!! I'll try to document what I'll do inside the car and snap pics of what-goes-where. Those pics above simply serves as spy-pics more than anything else. I'll be showing the real & completed kit shortly.

I'll get done this week, hit the dwtown roads and go for a quick photo shoot ;)

edit.... censured!

I LOVE this wind deflector x1,000. Looks amazing in real life...

I am simply incapable to take great shots in low lighting :/ Hopefully my mate here in Shanghai will be able to hear me scream for his "professional" services. I'll try to get better shots of the car along with its new shiny feature and also want to take pics of all the colors I have here... some are pretty amazing i.e. cold white, blue and amber

ps. kit passed that brutal hot & cold 48hrs runs, looks pretty reliable. In fact the kit that went in the oven is on my car atm lol

I'll get pricing and availability shortly. Those can ship out right after xmas (to avoid being clogged in the mail system due to the holiday rush)


http://986forum.com/forums/uploads01...1418999678.jpg


http://986forum.com/forums/uploads01...1418999689.jpg


http://986forum.com/forums/uploads01...1418999727.jpg

Wow. Looks really good, Fred, despite your photography issues!!

Damn that looks good ! So does the knob on the box adjust brightness or color ?

If that is how it looks with crappy photos (according to you), it must be amazing to the naked eye. Nice looking and amazing detail.

Yeah, agreed. That does look amazing! Looking forward!

Nah just the brightness. Dislike those RGB strips... hard to find in micro size and most I've seen needs 4 wires to operate. That'd add a river of cabling to the 'already-small' deflector Porsche kit :/ I agree tho... it is the way to go

This kit's simple, 100% stock lookin. Had to be. One little 3mm wire that you can't see! Strips are easily interchangeable. Love the CNC blades look also. OH... and no more stickers. Etching looks absolutely stunning in day time. Stopped by the car this morning on my way to the villa's mailbox.... my excuse just to look at the official deflector LIVE on the car. Keeping this badge (screw flowers, for now)

Not a huge mod I know lol but anything that makes me and the car happy is a successful mod here ;)

Thanks for the compliments guys. Grateful nobody flamed my 'pink' looking taillights

Is there any way to have a half red, half other color strip to support the break light idea I had? It should be easy..ish. I assume your setup is one or 2 wires coming out. My thinking is that you'd need to add one more wire to support the red LEDs. I'm still trying to get you to support that idea.

Tony

lol fair enough Tony. I'll see what I can do but really I wanted to get the kit out in a "as-simple-as-possible" format (12V +/- terminals, brightness feature, that's it!). At that point whatever you guys want to DIY with it is entirely up to you (fun weekend projects for some).

Dual-color = no, but dual intensity LED connected onto your brake light circuit is fine and really not complicated at all. One resistor + one diode and off you go ($1). You could tap into the brake light's 12v from the clam's brake light to enable your dual intensity. Vid below is how its done including hardware involved (bikes, cars, boat whatever runs 12DCV is all the same concept mate)

<iframe width="640" height="360" src="//www.youtube.com/embed/EfNZ4YXCy3s?feature=player_detailpage" frameborder="0" allowfullscreen></iframe>

Tony - got those taken for you to see what's happening there. Wire-wise it's the safest/smallest I could come up with to supply the 12v to the single-color LED strip. Already small, 26AWG wires covered by a PVC insulation (OD3mm).

There's the kit... simpler than that is hard! Gave it my best shot anyway.

- Etched window (Porsche bracket not included)
- LED strip in color of choice + one spare
- LED modules/blades (CNC thingny, black, no Skybreaker logo no worries)
- PWM Controller (Brightness thingy)
- Lots lots lots of wire for you to cut lol
* NO CLIPs. Found out some retail those for as cheap as $5 these days :/ didn't know.... remember paying something like $60 incl shipping once for those clips

http://986forum.com/forums/uploads01...1419249944.jpg

http://986forum.com/forums/uploads01...1419249966.jpg

Made-in-China my friend. $9.95 (+ tax... about $7,855)

Pretty cool stuff!!

Cheers mate :cheers:

Looking Good.

If I get this item, I may have to install a decal that states

"Porsche by Fred" :)

Same here:D But it's not "if I get"

So mean LOL

AD - Pricing for members released
 

Get ready! Here goes the LED colors that I have in stock. The etching/design is entirely up to you. I have the scripts for pretty much everything already (Boxster, S, 986, some flowers, etc). Anyone needs to see a draft of what his/her chosen design will look like, let me know and I'll send you the design - or simply post it here. Custom work accepted, please do get in touch with me anytime!

Those will go on sale on Jan 1st 2015. (Link to follow)
Price: $155 (Shipping is $32 International - ETA 10~15days)

Cold White:
http://986forum.com/forums/uploads01...1419336391.jpg

Amber:
http://986forum.com/forums/uploads01...1419336271.jpg

Blue:
http://986forum.com/forums/uploads01...1419336280.jpg

Green:
http://986forum.com/forums/uploads01...1419336312.jpg

Red:
http://986forum.com/forums/uploads01...1419336324.jpg

Voilet:
http://986forum.com/forums/uploads01...1419336358.jpg

Wicked cool Nine! Now I just have to figure out what colour would work best on my Arctic Silver.
As to hooking it up - I'm no electronic whiz...what's the difficulty scale on getting this installed do you think?

Looks really great!!!

Can you post a cold white " S " please ? I think that would look best on my Arctic Silver. Thanks

Be sure to put put me down for one of these:

http://986forum.com/forums/uploads01...1419336324.jpg

:D :cool:

Please blame USPS mail. It's already (stuck?) in the mail and on its way to you brother. With Bleu, white and red strips I think.... forgot the green sry

(just joking on USPS... I know it's a busy time for them)

Hey, I've got green, haha! :D

Seriously though, excellent quality work my friend, as always ;)

Looks absolutely great! With my car being black and the trunk brake light, I think the red would be perfect.

So, will it come with a few other colors to experiment?

I'd like to sign up for the "Skybreaker" and can't wait. I guess all I need is your link to the purchase process. Don't have paypal at the moment but can set that up.

Awesome looking product, looking forward to your next creation!

:cheers:
:dance:

I will be buying a red one for sure!

^ You're on, no worries

I've received a few PM y'day and feel I should have said that before: members who've shown interest in this thread are lined-up (priority) for one of these kit. There is no worries on that. I'll contact you directly by PM before the 1st so you can grab your kit before they vanish. Counted 8 of you guys already so there should be few left anyway. We'll see....

Giller, I'll snap a few pics of what the ashtray light conn looks like and how I'll snake the wire under the console (possibly just by pushing it in with my fingers). Has to be easy mate. rfuerst911sc - hang on a few days I'll get you that S draft mate

Let's do xmas first :)

Merry Christmas to you guys :cheers:

http://986forum.com/forums/uploads01...1419414924.jpg
(^pic stolen from another forum.... not my children lol)

I don't suppose you have any pics of other colors. I'd love to see white and then blue.

Thanks.
Tony

I'll save Fred the trouble, here are the pics you requested, amagalla

Sounds good, Merry Christmas!.....lucky Santa.

Nice work Nine8Six - Interested in ordering a red one.

Saw that. And thanks!

@Clint, got your note by pm y'day. Give me one more day to get settle with the fact that I've just spent little over $3k+ for this year's xmas :/ Two day flip: One dinner, and one night out in dwtown hell where-ever-it-was; Friend's fault - don't trust "anyone" LOL

Back in my cave (work) tonite !!!!!!!

No worries, the thing I like most about xmas is when it's finally over.:D

Downtown can be a gangerous place:eek:

Shame on you! Bah humbug!

I just thought of a simple question (forgot in all the excitement) and forgive me if its been asked already - How does it look in the rear view mirror of the driver? Especially at night, I presume vehicles headlights that are following you are brighter than the intensity of the LED's and will overpower them so it should not affect rear view visibility at all but thought I'd ask. What have you noticed Fred?

Cheers!

It's a sports car, who uses their rear view mirror?:p

I do! I enjoy looking back and seeing the expression on their face as I blow past them!

Dunno about you guys but in terms of visibility, the Boxster doesn't provide much between those hoops anyway I have to use my side mirrors more than anything else on this car.

In all honesty I haven't driven the boxster with the badge+porsche etched deflector I have at the moment. I did however drove the car during an evening between Shanghai and Anji (3hrs drive) at the beg of Dec with that stupid looking HUD thing lol (was a Porsche car group drive-out... so HAD to show off a little!). Took me about 30min to get used to it really - you forget about it. Even illuminated you can still see clearly what's behind ya imho. Might be different if you etch the entire surface area of the wind deflector with let's say, a full size/solid American flag design, dunno...

I did get to see what it look like when illuminated when I was taking pics the other day. If you ask me... I think the red Porsche lettering looks quite cool from the mirror. Kinda liked it a lot in fact lol

Not sure if anyone told you but its already Jan 1st 2015 here!!! Just back from a friend's home party (2hrs drive for a 20km distance). NEVER go out on New Year eve in a 26million pop city. My first mistake of the year I guess

Happy New Year everyone!

Oh, and as promised, that best-in-the-world(lol) boxster wind deflector is LIVE and avail for grab:

Illuminated Wind Deflector Kit for Boxster 986 - English

Thanks Fred, and Happy New Year!
I have mine ordered with the Amber and Violet lighting options. Nice touch having the extra LED strip included.

So, to make sure I get it right when I brag to my friends: These were designed in a private research facility using high tech computer simulations:

http://986forum.com/forums/uploads01...1420052715.jpg

...and a group of over 70,000 advisers:

http://986forum.com/forums/uploads01...1420052781.jpg

...made with the finest available materials, and assembled in China by a Canadian?

http://986forum.com/forums/uploads01...1420052822.jpg

Actually, I guess I enjoy the season, music etc. at first. But nonstop commercials that start before halloween is over get on my nerves. :D