|
1. clean off the rust of the hex the best you can (toothbrush ? dunno)
2. use an old hex key/wrench and epoxy the tip inside the hex
3. wait a few days (24~48hrs) for the epoxy to cure
4. spray wd-40 inside that thing, unlock your headlight
5. heat up the hex key/wrench RED to release the epoxy
6. remove your headlight
just a wild guess... not that I had to do it before
Luck mate
__________________
______________________________
'97 Boxster base model 2.5L, Guards Red/Tan leather, with a new but old Alpine am/fm radio.
|
Threaded Mode
