Quote:
Originally Posted by Evan_S
Yes, thankfully the kit is complete and still looks brand new!
Thanks, I'll look into it. Unfortunately most high-temperature a+b epoxy glues I found don't bond very well with glass. Maybe JB Weld?
I'm also thinking of using the type of angel eyes that I'm currently using as they automatically dim when you turn on the hid-lights to prevent a blinding light-intensity at night, but maybe the hole-pattern in the bezel should be sufficient.
|
Good news Evan. Was worried, I knew the kit was parted out but didn't remember if all parts we're shipped out. If you are missing anything just shoot me a PM and I'll get this sorted.
For the A+B, use this if you can get some locally. Will bond metals & glass and perform in both high & low temps (in the commercial grade epoxy anyway).
https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Scotch-Weld-Epoxy-Adhesive-DP420/?N=5002385+3293242436&rt=rud
Threaded Mode
