Porsche Headlight Retrofit [from CAD, prototyping to finish)

[BruceH]

Thanks Charles, but we are too late. Last night I wanted to show off my LED's and the right headlight LED's have quite a few that are no longer working So I guess my next question is how do I just disconnect the LED's? The thing is, I really have not driven at night very much so I thought I would be ok, I guess not. Oh well.

[particlewave]

Originally Posted by BruceH

Thanks Charles, but we are too late. Last night I wanted to show off my LED's and the right headlight LED's have quite a few that are no longer working So I guess my next question is how do I just disconnect the LED's? The thing is, I really have not driven at night very much so I thought I would be ok, I guess not. Oh well.

That's too bad.

Disconnect the small white connector as seen in this photo.

[Checkers]

Technical question, re: placement and wiring of second bulb after outer lense is removed and my inner burned lense also removed. I see the projector mounted in the top bulb hole, that`s straight forward. My question is what is the preferred method of the lower bulb hole Since the Bi-Zenon does both high and low beam and the inner lense is removed, is the original h7 bulb simply reinserted and connected to seal the assembly and eliminate bulb out dash warning light or is the hole filled with a blank to eliminate glare from h7 bulb. Thanks in advance for any help.