2001 Boxster S LED Taillight Mod - Need Resistor Help

[AndrewG]

Hi all -

I just purchased a LED 3rd brake light and a pair of Depo Tailights that have LED brake lights to upgrade my 2001 S. As I was anticipating the error codes from changing to all LED brake lights I bought resistors. However, I can't seem to find any information on which are the ground and brake light wires in the harness to attach the resistors on to. Any help is greatly appreciated.

Andrew

[tonycarreon]

can't say anything about the 3rd light. but the depo are direct replacement. no other parts needed. remove the old one, put in the new ones.

[AndrewG]

Thanks; it is the 3rd brake light's LED that pulls the draw down far enough to get the error codes.

[AndrewG]

Thought I would update this post that I added a 25w load resistor on the 3rd brake light which cleared the brake error codes.