2001 Boxster S LED Taillight Mod - Resistors
Hi all -
I just purchased a LED 3rd brake light and a pair of Depo Tailights that have LED brake lights to upgrade my 2001 S. As I was anticipating the error codes from changing to all LED brake lights I bought resistors. However, I can't seem to find any information on which are the ground and brake light wires in the harness to attach the resistors on to. Any help is greatly appreciated. Andrew |
can't say anything about the 3rd light. but the depo are direct replacement. no other parts needed. remove the old one, put in the new ones.
|
Thanks; it is the 3rd brake light's LED that pulls the draw down far enough to get the error codes.
|
Thought I would update this post that I added a 25w load resistor on the 3rd brake light which cleared the brake error codes.
|
All times are GMT -8. The time now is 06:03 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website