|
After reading many of the posts I used a few tips from several people and did my mod in probably 5 mins. I have a a 2000S with welded tips and was having problems getting the right angle and getting the drill bit to bite. I used a long screwdriver and used it as a punch and made an X shape and then I had a large lag bolt I ground down on my grinder ( didnt have a long 1/2 bit handy) and then used it to finish the holes.
Spent more time reading through all the posts than it took me to do it. If you are handy and have welded tips then there are several ways to make this work. This was what I used to knock it out tonight.
|
Threaded Mode
