Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster and Cayman Classified Ads > Boxsters and Cayman Cars for Sale or Wanted

Post Reply
 
LinkBack Thread Tools Display Modes
Old 10-22-2008, 12:20 PM   #21
Registered User
 
Brad Roberts's Avatar
 
Join Date: Aug 2004
Location: Alta Loma, CA
Posts: 1,334
-New Adjustible Front Upper Control Arms
-New Adjustible Rear Upper Control Arms

Can you explain this a little better? I have someone interested in the car, but so far, NOBODY he has spoken too can figure out what "new adjustable Upper front control arms" are, and that includes ME

Bottom line: did you install GT3 front arms on all four corners?

Also: WHAT shocks did you use when they where replaced?



B

__________________
Engine Builds, Transmission Builds, Engine Conversions, Suspension Installs, Suspension Tuning, Driver Coaching, Data Acquisition, Video, SCCA/PCA/POC/NASA/GRAND AM/ALMS.
We have worked with amateur and professional drivers for over 26 years. In house machinist, In house fabrication. Our cars, our parts, our engines, our transmission's run nationwide at events every weekend. We work side by side with industry names developing parts.
Brad Roberts is offline   Reply With Quote
Old 10-22-2008, 03:44 PM   #22
Registered User
 
Join Date: Jul 2006
Location: Where the Sewer Meets the Sea, CA. USA
Posts: 2,695
Send a message via MSN to CJ_Boxster
Quote:
Originally Posted by Brad Roberts
-New Adjustible Front Upper Control Arms
-New Adjustible Rear Upper Control Arms

Can you explain this a little better? I have someone interested in the car, but so far, NOBODY he has spoken too can figure out what "new adjustable Upper front control arms" are, and that includes ME

Bottom line: did you install GT3 front arms on all four corners?

Also: WHAT shocks did you use when they where replaced?



B
Attached below are images of which control arm is replaced with Adjustibles... They mount to the Lower control arm then mount forward to the chasis of the vehicle.
All 4 corners were replaced

The third & forth pictures are of the actual adjustible control arms.

The struts were replaced with OEM Porsche Struts, not Bilsteins or Aftermarkets.
__________________
--Proud Boxster Owner/Tech,

Carlos J Cazares

FastForward Performance
http://i10.photobucket.com/albums/a1...er/newsig1.jpg
CJ_Boxster is offline   Reply With Quote
Old 10-22-2008, 05:19 PM   #23
Registered User
 
Brad Roberts's Avatar
 
Join Date: Aug 2004
Location: Alta Loma, CA
Posts: 1,334
Got it! Thank you.



B
__________________
Engine Builds, Transmission Builds, Engine Conversions, Suspension Installs, Suspension Tuning, Driver Coaching, Data Acquisition, Video, SCCA/PCA/POC/NASA/GRAND AM/ALMS.
We have worked with amateur and professional drivers for over 26 years. In house machinist, In house fabrication. Our cars, our parts, our engines, our transmission's run nationwide at events every weekend. We work side by side with industry names developing parts.
Brad Roberts is offline   Reply With Quote
Old 10-31-2008, 09:34 AM   #24
Registered User
 
Join Date: Jul 2006
Location: Where the Sewer Meets the Sea, CA. USA
Posts: 2,695
Send a message via MSN to CJ_Boxster
My boxster is still available incase anyone is still interested. I've changed the price to $10,500.
__________________
--Proud Boxster Owner/Tech,

Carlos J Cazares

FastForward Performance
http://i10.photobucket.com/albums/a1...er/newsig1.jpg
CJ_Boxster is offline   Reply With Quote
Old 10-31-2008, 09:43 AM   #25
Registered User
 
Brad Roberts's Avatar
 
Join Date: Aug 2004
Location: Alta Loma, CA
Posts: 1,334
CJ,

the mileage is scaring them away. Can you provide us with compression numbers and maybe a leak down test? I have had multiple people ask me about this car, and the common verbage I hear from them "mileage is high". I know you cant do anything about it, but even the BoxsterSpec guy's shy away from the really high mileage cars unless they can prove the engine was replaced somewhere along the line.

Have you spent ANY time under this engine? Can you get a shot/pic for me? I need to see if it has the cosmoline on it, or it has the later oil pan.



B
__________________
Engine Builds, Transmission Builds, Engine Conversions, Suspension Installs, Suspension Tuning, Driver Coaching, Data Acquisition, Video, SCCA/PCA/POC/NASA/GRAND AM/ALMS.
We have worked with amateur and professional drivers for over 26 years. In house machinist, In house fabrication. Our cars, our parts, our engines, our transmission's run nationwide at events every weekend. We work side by side with industry names developing parts.
Brad Roberts is offline   Reply With Quote
Old 10-31-2008, 11:12 AM   #26
Registered User
 
Join Date: Jul 2006
Location: Where the Sewer Meets the Sea, CA. USA
Posts: 2,695
Send a message via MSN to CJ_Boxster
Quote:
Originally Posted by Brad Roberts
CJ,

the mileage is scaring them away. Can you provide us with compression numbers and maybe a leak down test? I have had multiple people ask me about this car, and the common verbage I hear from them "mileage is high". I know you cant do anything about it, but even the BoxsterSpec guy's shy away from the really high mileage cars unless they can prove the engine was replaced somewhere along the line.

Have you spent ANY time under this engine? Can you get a shot/pic for me? I need to see if it has the cosmoline on it, or it has the later oil pan.



B
Yup I have lots of time under the car since I did all the work myself on it. Its got the original engine, I verified the engine serial numbers with Porsche and they match up. It wont be till next week for me to get pictures of the under carriage of the car since I have alot of work in the shop right now.

Ill perform a cylindar compression test when i have it up on the lift and post the results here. Since the engine runs smooth even with a solid engine mount im sure the results will be good. Ill post the pic and results on wednesday afternoon.
__________________
--Proud Boxster Owner/Tech,

Carlos J Cazares

FastForward Performance
http://i10.photobucket.com/albums/a1...er/newsig1.jpg
CJ_Boxster is offline   Reply With Quote
Old 01-05-2009, 01:26 PM   #27
Registered User
 
Join Date: Sep 2007
Location: Rancho Cucamanga
Posts: 132
I have seen his car run and was lucky enough to ride in it. I have to say, he took really good care of that car. I have a 2002 Boxster and I do not think my car run as well as his. He have done many upgrade on the 97' boxster. Such as, the rear glass window and the LI-Tronics headlights like the 2002 to 2003 boxsters.
this is a great buy!!
fu03steve is offline   Reply With Quote
Old 01-06-2009, 09:29 AM   #28
Registered User
 
Join Date: Jul 2006
Location: Where the Sewer Meets the Sea, CA. USA
Posts: 2,695
Send a message via MSN to CJ_Boxster
Thanks Steve-O, Unfortunatly I decided to not sell my Boxster for financial reasons and since November was a very bad time to try and sell it since I was getting super lowball offers for $8k, Ill put her back up for sale when I can afford to purchase and maintain the P-car i desire and the buyer market is alittle stronger.
__________________
--Proud Boxster Owner/Tech,

Carlos J Cazares

FastForward Performance
http://i10.photobucket.com/albums/a1...er/newsig1.jpg
CJ_Boxster is offline   Reply With Quote
Old 01-06-2009, 03:26 PM   #29
Registered User
 
Join Date: Sep 2007
Location: Rancho Cucamanga
Posts: 132
oh yay!! that is even better... now I don't have to be jealous of your car when we go out on a run.
8k?? wow! did you tell them it is not a Honda!

that is a good reason not to sell, I thought you were going to say, "im saving up the money because I'm getting married"
ahaha

fu03steve is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page