Heat Exchanger delete+oil cooler added

[Gelbster]

Originally Posted by The Radium King

997 oil cooler has the same footprint as your oil cooler but is 15 mm taller - perhaps wedge one of those in there.

Pelican has a project for that but mentioned that it may/may not fit. I did not understand why they waffled on the fit. They did confirm it is substantially taller.It is tempting because it seems an easy substitution - if it fits under the Bank 2 intake.

[specboxCO]

If the coolant system is working as it should, it has way more capacity to remove heat from the oil than is needed. If you have an overheating issue, it is almost 100% on the water side. There is no need at all for an external oil cooler.