Got my S back after suspension upgrade

[seningen]

Sourced a lightly used spec box setup
With some KWsports, 500# front and 650# rears

From various folks I picked up
A set of M030 sways, some tarrett rear drop links, tarrett camber plates, and new tarrett monoballs rear strut mounts.

Did a little tower dremmel mods to the front camber mounts.

Just got it back from the alignment shop

Pulling -2.8 degrees front camber and -2.3 rear camber.

New Dirrezza Ii's on rear to go with Dirrezza 1's up front

Installed Underdrive pulley, plumbed for oil pressure gauge (although I have to wire up the gauge still)

Felt really solid on the ride home.

Stiff for sure, but not intolerable.

Can't wait to hit the track and see how the upgrade performs.

Mike