07-17-2023, 02:03 PM
|
#1
|
Casual Driver
Join Date: Feb 2023
Location: Spain
Posts: 21
|
Metal Rattle Noise from Rear Right
Hello everyone, I seem to be having a noise issue and I cannot determine what is causing it.
The sound seems to be coming from the rear right. It usually only happens when driving slow in 1st and 2nd gear in the 2,000 - 3,000rpm range.
It sounds like a metal Rattle and I have no idea what it could be. Would appreciate any help, thanks in advance!
|
|
|
07-17-2023, 05:25 PM
|
#2
|
Registered User
Join Date: Jan 2019
Location: PA
Posts: 1,548
|
Quote:
Originally Posted by jamesmartin986
Hello everyone, I seem to be having a noise issue and I cannot determine what is causing it.
The sound seems to be coming from the rear right. It usually only happens when driving slow in 1st and 2nd gear in the 2,000 - 3,000rpm range.
It sounds like a metal Rattle and I have no idea what it could be. Would appreciate any help, thanks in advance!
|
Is it RPM-related or speed-related? Smooth road or over bumps?
__________________
2002 Boxster Base - Arctic Silver - Tiptronic
2010 Subaru Forester
1980 Ford C-8000 Custom Cab Emergency-One Fire Truck
__________________
"I never lose. I either win or I learn." -Nelson Mandela
|
|
|
07-17-2023, 05:28 PM
|
#3
|
Motorist & Coffee Drinker
Join Date: Jul 2014
Location: Oklahoma
Posts: 3,813
|
The rattle in that area that I have found was a loose heat shield on the exhaust.
__________________
I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
|
|
|
07-17-2023, 08:24 PM
|
#4
|
Casual Driver
Join Date: Feb 2023
Location: Spain
Posts: 21
|
Quote:
Originally Posted by piper6909
Is it RPM-related or speed-related? Smooth road or over bumps?
|
I think it's more RPM related as I can hear it when driving past things that bounce the sound back (such as barriers). Not as audible when driving fast but I'm pretty sure it's there.
Does it on both flat surfaces and bumpy surfaces.
__________________
Porsche Boxster S 986 3.2 | Manual | Midnight Blue
Last edited by jamesmartin986; 07-17-2023 at 08:28 PM.
|
|
|
07-17-2023, 08:25 PM
|
#5
|
Casual Driver
Join Date: Feb 2023
Location: Spain
Posts: 21
|
Quote:
Originally Posted by 78F350
The rattle in that area that I have found was a loose heat shield on the exhaust.
|
Thanks! Is it relatively easy to get to and repair?
__________________
Porsche Boxster S 986 3.2 | Manual | Midnight Blue
|
|
|
07-18-2023, 01:23 AM
|
#6
|
Motorist & Coffee Drinker
Join Date: Jul 2014
Location: Oklahoma
Posts: 3,813
|
Quote:
Originally Posted by jamesmartin986
Thanks! Is it relatively easy to get to and repair?
|
With the wheel removed it should be easy to access. You can probably use a metal hose clamp to secure it. Welding would be the best repair.
__________________
I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
|
|
|
07-18-2023, 10:35 AM
|
#7
|
Casual Driver
Join Date: Feb 2023
Location: Spain
Posts: 21
|
Quote:
Originally Posted by 78F350
With the wheel removed it should be easy to access. You can probably use a metal hose clamp to secure it. Welding would be the best repair.
|
Thanks!
Just a quick update. I had a look under (difficulty I may add as I was on the floor). It appears to be solid, but I had accelerated to the RPM is starts and it's definitely coming from the heat shield area. Could it possibly be that something else it rattling on it?
Ideally having it lifted and looked at is best, but if I'm able to determine where it's coming from and hopefully get it fixed.
__________________
Porsche Boxster S 986 3.2 | Manual | Midnight Blue
|
|
|
07-18-2023, 01:18 PM
|
#8
|
Motorist & Coffee Drinker
Join Date: Jul 2014
Location: Oklahoma
Posts: 3,813
|
It can be very hard to find a rattle like that visually. Often if I am working alone, I'll place a cellphone recording video of the area I want to see or to reach into an area that I can't easily get my eyes.
If you can get it to rattle while slowly revving the engine with the car standing still, I'm still betting that it's the heat shield.
If that shield can be moved at all, it is detached and will rattle.
__________________
I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
|
|
|
07-18-2023, 01:40 PM
|
#9
|
Casual Driver
Join Date: Feb 2023
Location: Spain
Posts: 21
|
Quote:
Originally Posted by 78F350
It can be very hard to find a rattle like that visually. Often if I am working alone, I'll place a cellphone recording video of the area I want to see or to reach into an area that I can't easily get my eyes.
If you can get it to rattle while slowly revving the engine with the car standing still, I'm still betting that it's the heat shield.
If that shield can be moved at all, it is detached and will rattle.
|
I think my best bet is to have the car lifted and have look for myself. I was able to get my arm under and give it good shake but it seems rock stiff and in tact. However, I couldn't get to the part above the frame so maybe that's where it needs repairing. Once again, thanks!
__________________
Porsche Boxster S 986 3.2 | Manual | Midnight Blue
|
|
|
07-18-2023, 06:00 PM
|
#10
|
Registered User
Join Date: Jul 2010
Location: California
Posts: 1,859
|
Quote:
Originally Posted by jamesmartin986
I think my best bet is to have the car lifted and have look for myself. I was able to get my arm under and give it good shake but it seems rock stiff and in tact. However, I couldn't get to the part above the frame so maybe that's where it needs repairing. Once again, thanks!
|
Gravel will get inside that exhaust heat shield and cause rattling noises. I ended up removing the heat shields from my exhaust.
__________________
Jäger
300K Mile Club
|
|
|
07-18-2023, 09:08 PM
|
#11
|
Registered User
Join Date: Jul 2019
Location: Finland
Posts: 321
|
Quote:
Originally Posted by jamesmartin986
I think my best bet is to have the car lifted and have look for myself. I was able to get my arm under and give it good shake but it seems rock stiff and in tact. However, I couldn't get to the part above the frame so maybe that's where it needs repairing. Once again, thanks!
|
On my car these rattled only when hot and did not show movement trying to move by hand when decent temperesture for a touch.
I did replace the downpipes with 200 cpi sport cats. No more rattles.
__________________
Boxster 2.7 2001 Manual
|
|
|
07-19-2023, 09:49 AM
|
#12
|
Registered User
Join Date: Dec 2009
Location: Orange County, CA
Posts: 1,910
|
Quote:
Originally Posted by jamesmartin986
I think my best bet is to have the car lifted and have look for myself. I was able to get my arm under and give it good shake but it seems rock stiff and in tact. However, I couldn't get to the part above the frame so maybe that's where it needs repairing. Once again, thanks!
|
James, you should get (or borrow) a couple of jack stands and get the rear of the car (safely..!) on the air so you can have the engine running and try to determine where the rattle comes from.
Like suggested by 78F350, if is a heat shield it will be way easier to find, bottom line you need to get your hands a little dirty and you may have to remove the rear exhaust to properly get the heatshield properly welded again. Or better yet get a SpeedArt Sport exhaust, you will get rid of the rattle and get an awesome sound without drone.
Saludos de California :-)
PS: En que parte de España vives?
Last edited by Gilles; 07-19-2023 at 06:56 PM.
|
|
|
07-19-2023, 07:21 PM
|
#13
|
Registered User
Join Date: Jul 2023
Location: Florida
Posts: 16
|
Quote:
Originally Posted by Gilles
James, you should get (or borrow) a couple of jack stands and get the rear of the car (safely..!) on the air so you can have the engine running and try to determine where the rattle comes from.
Like suggested by 78F350, if is a heat shield it will be way easier to find, bottom line you need to get your hands a little dirty and you may have to remove the rear exhaust to properly get the heatshield properly welded again. Or better yet get a SpeedArt Sport exhaust, you will get rid of the rattle and get an awesome sound without drone.
Saludos de California :-)
PS: En que parte de España vives?
|
Don’t forget to look at sway bar links. Mine are rattling
|
|
|
07-20-2023, 05:49 AM
|
#14
|
Casual Driver
Join Date: Feb 2023
Location: Spain
Posts: 21
|
Quote:
Originally Posted by Gilles
James, you should get (or borrow) a couple of jack stands and get the rear of the car (safely..!) on the air so you can have the engine running and try to determine where the rattle comes from.
Like suggested by 78F350, if is a heat shield it will be way easier to find, bottom line you need to get your hands a little dirty and you may have to remove the rear exhaust to properly get the heatshield properly welded again. Or better yet get a SpeedArt Sport exhaust, you will get rid of the rattle and get an awesome sound without drone.
Saludos de California :-)
PS: En que parte de España vives?
|
A friend of mine has his own workshop/garage, next week he's kindly going to get the cars' rear up slightly to make it easier to determine where is rattling.
I'm based in the Tarragona area of Catalonia. I'm not Spanish though, I'm British hehe! I am fluent in Spanish though!
Thanks for the help!
__________________
Porsche Boxster S 986 3.2 | Manual | Midnight Blue
|
|
|
06-02-2024, 08:20 AM
|
#15
|
Registered User
Join Date: Jun 2024
Location: San jose
Posts: 2
|
Any update?
Quote:
Originally Posted by jamesmartin986
A friend of mine has his own workshop/garage, next week he's kindly going to get the cars' rear up slightly to make it easier to determine where is rattling.
I'm based in the Tarragona area of Catalonia. I'm not Spanish though, I'm British hehe! I am fluent in Spanish though!
Thanks for the help!
|
Hi james, I am going through the same issuse, have a terrible rattling sound on the right side somewhere in 2-3k rpm range in 2nd gear, goes away at higher rpm and gears. Could hear it well when the sound gets reflected from a side wall or something as you observed. Could you give us an update on your findings, might help me with my debug.
|
|
|
06-02-2024, 01:47 PM
|
#16
|
Registered User
Join Date: Apr 2024
Posts: 48
|
I had this problem with a loose heat shield on the gilette pipes (secondary cat). A stainless steel zip tie looped around and through the loose shield fixed my problem. The heat shield may not be obviously loose but any ability to twist the shield while cold is an indication that you could have a rattle under other conditions.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 08:00 AM.
| |