Quote:
Originally Posted by JFP in PA
Posche diagnostic tools, the PIWIS, can "force" an I/M Readiness reset, which by-the-by is illegal as it subverts both state and federal emission protocols. Sooner or later the shop doing this is going to be told by their legal advisors that they can be fined, and in some states even imprisoned, for doing exactly that as it constitutes a felony nor unlike the one VW got nailed for some time back over emissions system defeat.
If you brought the car into my shop and told me what you wanted, I would tell you to take it elsewhere; no shop worth its salt is going to continue put itself into legal jeopardy just to get you back on the road. And no, the Durametric cannot do the I/M Readiness forced reset, and neither can most other systems priced below about $10-12K.
When you bought the car, you knew it was a complex performance vehicle, which was not inexpensive to buy, own, or maintain. Either get the vehicle properly repaired or sell it at a loss to someone willing to make the proper repairs.
|
thanks again JPF. This is what I was talking about, tho I thought it was a Durametric tool that cleared the computer.
I have no doubt clearing CEL for the purpose of getting a clear smog test is illegal. But from what I was told, the car is by no means running dirty. The results of the smog tests I’ve had are excellent and have nothing to do with the cleared CEL.
Spending $7k to clear a CEL on a $10-12k 23yr old car is silly. I’ve owned many Porsches over the last 30 years and I do not like getting $$ buried in them. I usually dump them before they begin to cost a lot. I’ll keep paying $200 every 2 years to smog it, until something majors goes wrong.
What kind of shop do you own? Have you done actuators on a 2.7 motor?
Base Boxster
Threaded Mode
