Convertible top relay

[dghii]

Maybe find another Box owner in your area and do a quick swap. Remember that earlier cars 97-99) had a different relay than newer 986's.

[mtb50]

Originally Posted by dghii

Maybe find another Box owner in your area and do a quick swap. Remember that earlier cars 97-99) had a different relay than newer 986's.

I failed to mention I have a 2000 model. I'm new here and don't know of anyone that has one. Thanks for the info

[Homeoboxter]

Originally Posted by mtb50

I failed to mention I have a 2000 model. I'm new here and don't know of anyone that has one. Thanks for the info

What makes you think it may be faulty?

[mtb50]

Originally Posted by Homeoboxter

What makes you think it may be faulty?

First off window fuses are good. There's no hot pin at the window switch plug and wiring diagram shows hot wire going through fuse then to relay. Windows do nothing.

[particlewave]

Originally Posted by mtb50

First off window fuses are good. There's no hot pin at the window switch plug and wiring diagram shows hot wire going through fuse then to relay. Windows do nothing.

Someone sent you on a wild goose chase.

I’ve been watching your posts. If you want to fix your window problem, start at the immobilizer. Best of luck.

[mtb50]

Originally Posted by particlewave

Someone sent you on a wild goose chase.

I’ve been watching your posts. If you want to fix your window problem, start at the immobilizer. Best of luck.

Ok so what do I need to check on the immobillizer? Here is were I'm at . There are 3 pins in the middle of the switch. A BRN/GRN/BLK wire coming from the top relay should be hot and it's not. I've gone to the middle pin with a hot wire and the windows go up and down. The top relay does power the top but not the windows I'd appreciate any help

[Zzorro]

Originally Posted by mtb50

Ok so what do I need to check on the immobillizer? Here is were I'm at . There are 3 pins in the middle of the switch. A BRN/GRN/BLK wire coming from the top relay should be hot and it's not. I've gone to the middle pin with a hot wire and the windows go up and down. The top relay does power the top but not the windows I'd appreciate any help

CLU = Central locking unit = Immobilizer. To troubleshoot the convertable top electronics have a look at that YouTube video I sent. That diagnostic sheet he references is a full diagnosis.

[mtb50]

Originally Posted by particlewave

Someone sent you on a wild goose chase.

I’ve been watching your posts. If you want to fix your window problem, start at the immobilizer. Best of luck.

Your were definitely right about starting at the CLU. 78F350 has been a lot of help as well I've cleaned the board with alcohol and will see what happens Thanks