Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Reply
 
LinkBack Thread Tools Display Modes
Old 09-14-2020, 06:40 PM   #1
Registered User
 
Join Date: Nov 2016
Posts: 114
SOLUTION: Using DSP 6 Channel Amp in Non-DSP Car

For various reasons, people have wanted to replace their stock existing amp with a 6-channel version. People thought they couldn't use the DSP version because it requires a signal from the DSP unit to power on. Therefore, people looked for the 6-channel amp from the 911 because there was a version without DSP.

Today I found the solution! You simply jumper pin 1 and pin 18 in the 18 pin connector that plugs into the amp. This is similar to jumpering pins 2 and 6 on the DSP connector in the console, but you can now do in on cars that never had DSP in the first place.

I.E. Pins 2 and 6 on the dash side translates to 1 and 18 on the amp side.

lskolnick is offline   Reply With Quote
Old 09-14-2020, 07:54 PM   #2
Registered User
 
jaykay's Avatar
 
Join Date: Sep 2009
Location: toronto
Posts: 2,488
I have 2 and 6 jumped on my DSP plug in order to get rid of the controller.....this was a suggestion from a forum member more electrically inclined than I am. There is a increased background hiss with this method. Perhaps jumping at the amp will cure this.

__________________
00 986 S....with a few tweaks
jaykay is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page