LS V8 swap into a Boxster S

[outsidetheboxster]

Can anyone recommend an inexpensive scan tool to use while the swap is on-going? I imagine I will need to clear codes repeatedly while looking for the right things to disconnect or hook back up again. I can borrow one from the local auto parts store but not long term and it would be convenient to have one on the shelf when needed.

Thanks!

[outsidetheboxster]

Hi All

Made my first mistake I can't fix on my own. (Thought that might get your attention.)

Moved parking brake crank assembly and got it all tidied up and workable. Same location but 2" forward from stock. Easy fit! Went to drop the body over the engine one final time and bolt it all in. Got the rear mounts in and went to the front only to discover the strange sound I had heard while lowering the lift was the drivers side cable getting caught on top of the head and stretching it out. Added about 3" of length and unraveled a bunch of housing. Found and ordered a used cable on the E-site. Should be here in a week.

If that's my worst issue I'll be happy! Getting closer to an initial start every time I work on it. Next is wiring and fuel lines. Still moving along and hoping to have it motivating under it's own power in the spring.

Cheers!