Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 06-09-2019, 12:54 PM   #1
Registered User
 
Join Date: Jun 2016
Location: Quebec, Qc, canada
Posts: 93
Thanks all for your comments.

I finally answered my own question.
Yes the upper quarter panel area can be accessed removing the tail light.

About 27-28 inches deep. After that there is a transversal plastic support bedded in yellow foam.

Lucky because the ding seems to be a inch before that support.

The access is at the leftmost hole. See the red circle on the pic below.

Again thanks all.

pomerlo is offline   Reply With Quote
Old 06-10-2019, 06:17 AM   #2
2003 S, Arctic Silver, M6
 
paulofto's Avatar
 
Join Date: Oct 2014
Location: Winnipeg, MB, Canada
Posts: 1,346
Garage
I had a series of dents and one 'bulge' repaired by a PDR shop. They did every one of them without accessing from below the dent, all were done from the surface with a variety of tools. Once done there wasn't a trace of the dents These guys, the good ones, are amazing.
paulofto is offline   Reply With Quote
Old 06-10-2019, 05:46 PM   #3
1997 Tip, 2018 Macan
 
rexcramer's Avatar
 
Join Date: Aug 2015
Location: Upland, CA
Posts: 1,338
Garage
How about a before and after picture, please?

Quote:
Originally Posted by pomerlo View Post
Thanks all for your comments.

I finally answered my own question.
Yes the upper quarter panel area can be accessed removing the tail light.

About 27-28 inches deep. After that there is a transversal plastic support bedded in yellow foam.

Lucky because the ding seems to be a inch before that support.

The access is at the leftmost hole. See the red circle on the pic below.

Again thanks all.

rexcramer is offline   Reply With Quote
Old 06-10-2019, 06:08 PM   #4
Registered User
 
Join Date: Jun 2016
Location: Quebec, Qc, canada
Posts: 93
Yeah...finally we end up by drilling a hole in the inner fender. The PDR guy said that thru the tail light was too far from the ding to have enough leverage.

Very satisfied with the result. It is back at 99 %
Impossible to see by someone who dont know where exactly the ding was.

It was his first Boxster. He said the metal sheet is thick like hell and kind of difficult to work with. But end up pretty well.

-------------------------------------------------


Before
Name:  IMG_16663.jpg
Views: 983
Size:  14.2 KB


After




Again thanks all for your input !

Last edited by pomerlo; 06-10-2019 at 06:28 PM.
pomerlo is offline   Reply With Quote
Old 06-10-2019, 06:41 PM   #5
1997 Tip, 2018 Macan
 
rexcramer's Avatar
 
Join Date: Aug 2015
Location: Upland, CA
Posts: 1,338
Garage
That came out great. Eventually, you will forget exactly where to look.

My car has a dent almost the exact same size, spot and color. (self inflicted I might add) I was looking for an air leak with my scope and oops. I have access to the PDR shop that our dealer uses for all of their cars. Bit of a drive, but worth it. They took a spot out of our 09 S before we sold it. Also required some paint that matched perfectly. Wizards I tell you.
rexcramer is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page