Spacers...

[Cunningr]

Originally Posted by Van914

If interested I have a set of 15MM with Bolts for sale. Posted in Parts for sale.
Thanks
Van

Can you link to the other post as I couldn't find it? Was looking at ECS but no 15MM with bolt sets in silver only HR which seem too expensive. like $350

[Racer Boy]

You need the longer bolts, too.

[Van914]

Cunningr,
Here is the For Sale post.
FS 15mm spacers
Thanks
Van

[Lapister]

Originally Posted by Van914

Cunningr,
Here is the For Sale post.
FS 15mm spacers
Thanks
Van

c
Do these come with the 2 piece correct longer Lugbolts?

[Cunningr]

Originally Posted by Lapister

c
Do these come with the 2 piece correct longer Lugbolts?

Thanks I sent a PM. To seller.

[Van914]

Originally Posted by Lapister

c
Do these come with the 2 piece correct longer Lugbolts?

Yes they do

Van

[A8ked]

Here are 20mm spacers on 17" Turbo Twist wheels.

[Burg Boxster]

Originally Posted by A8ked

Here are 20mm spacers on 17" Turbo Twist wheels.

Looking spot on... hopefully you bought same 20mm for front as they can easily use same if not a smidge more than rear...

Good luck

[A8ked]

Read again carefully I said no rubbing.

[A8ked]

Lew,
I'll try to get photos from the front and back tomorrow.

[A8ked]

A couple more photos for Lew.
20mm Spacers on 17" Turbo Twist wheels. Hope these are helpful.

[Starter986]

Originally Posted by A8ked

Read again carefully I said no rubbing.

No ****************, Dick Tracy. All this talk about rubbing, and you've got inches. I could fit 6 of my dicks in there.

My question was general in that you've a ****************ing grand canyon between your wheels and the lip. Who in their right ****************ing mind would not see that and still ask about rubbing? Or even mention the absence of it. Am I ****************ing missing something here?

Please read carefully? I read for a ****************ing living.**************** off.

You're from Seattle? I'm sorry. I'll try to speak slower next time.

Have a nice day.

[A8ked]

Yes, you are missing something, I was simply responding to the question from "ShortRound " as to if there was any rubbing. Perhaps you should be venting your frustration to "ShortRound" he asked the question.
Sorry, I did not intend to question your intelligence or manhood.

[ShortRound]

20mm on both front and back with no rubbing?

[Cunningr]

I have a set of 15mm on the way. ECS said 15mm bout right.

[A8ked]

Yes, 20mm on both front and rear with no rubbing.
Photo of front with 20mm

[Lew]

Originally Posted by A8ked

Yes, 20mm on both front and rear with no rubbing.
Photo of front with 20mm

Would you post a picture from the back and the front of your car?

Thanks!

[Starter986]

Originally Posted by A8ked

Yes, 20mm on both front and rear with no rubbing.
Photo of front with 20mm

Rubbing? Where? You've got about 10 feet of space there. I'm confused. Rubbing?

[Lew]

Looking Good, Thanks!

[ymkmkrz]

Originally Posted by tonythetiger

Team,

What are the widest spacers I can put on a stock 986 S without rubbing. I was thinking 20mm front, 15 rear, but I want to use stock bolts for the wheel and thought I'd ask who sells a complete kit. Advice on width and sourcing would be appreciated.

I have the 18" wheels.

I would not use regular spacers and longer bolts for 20mm or wider. You can get hub centric spacers that use your stock bolts with lugs and nuts to attach your wheels. They aren’t cheap, but shouldn’t wear out your wheel bearings so fast.


Sent from my iPhone using Tapatalk